#include "hsa.h"
#include "hsa_ext_image.h"

Include dependency graph for hsa_ext_amd.h:

Data Structures
struct	hsa_amd_vendor_packet_header_t
	AMD vendor specific AQL packet header. More...

struct	hsa_amd_barrier_value_packet_t
	AMD barrier value packet. Halts packet processing and waits for (signal_value & ::mask) ::cond ::value to be satisfied, where signal_value is the value of the signal ::signal. More...

struct	hsa_amd_hdp_flush_t

struct	hsa_amd_profiling_dispatch_time_t
	Structure containing profiling dispatch time information. More...

struct	hsa_amd_profiling_async_copy_time_t
	Structure containing profiling async copy time information. More...

struct	hsa_amd_memory_pool_t
	A memory pool encapsulates physical storage on an agent along with a memory access model. More...

struct	hsa_pitched_ptr_t

struct	hsa_amd_memory_pool_link_info_t
	Link properties when accessing the memory pool from the specified agent. More...

struct	hsa_amd_image_descriptor_t
	Encodes an opaque vendor specific image format. The length of data depends on the underlying format. This structure must not be copied as its true length can not be determined. More...

struct	hsa_amd_pointer_info_t
	Describes a memory allocation known to ROCr. Within a ROCr major version this structure can only grow. More...

struct	hsa_amd_ipc_memory_t
	256-bit process independent identifier for a ROCr shared memory allocation. More...

struct	hsa_amd_gpu_memory_fault_info_t
	AMD GPU memory fault event data. More...

struct	hsa_amd_gpu_hw_exception_info_t
	AMD GPU HW Exception event data. More...

struct	hsa_amd_event_t
	AMD GPU event data passed to event handler. More...

struct	hsa_amd_svm_attribute_pair_t

struct	hsa_amd_vmem_alloc_handle_t
	Struct containing an opaque handle to a memory allocation handle. More...

struct	hsa_amd_memory_access_desc_t

Macros
#define	HSA_AMD_INTERFACE_VERSION_MAJOR 1

#define	HSA_AMD_INTERFACE_VERSION_MINOR 4

Typedefs
typedef uint32_t	hsa_signal_condition32_t
	A fixed-size type used to represent ::hsa_signal_condition_t constants. More...

typedef uint8_t	hsa_amd_packet_type8_t
	A fixed-size type used to represent hsa_amd_packet_type_t constants. More...

typedef bool(*	hsa_amd_signal_handler) (hsa_signal_value_t value, void *arg)
	Asyncronous signal handler function type. More...

typedef hsa_amd_ipc_memory_t	hsa_amd_ipc_signal_t
	256-bit process independent identifier for a ROCr IPC signal. More...

typedef hsa_status_t(*	hsa_amd_system_event_callback_t) (const hsa_amd_event_t event, void data)

typedef void(*	hsa_amd_deallocation_callback_t) (void ptr, void user_data)
	Deallocation notifier function type. More...

Enumerations
enum	hsa_amd_packet_type_t { HSA_AMD_PACKET_TYPE_BARRIER_VALUE = 2 }
	AMD vendor specific packet type. More...

enum	{ HSA_STATUS_ERROR_INVALID_MEMORY_POOL = 40 , HSA_STATUS_ERROR_MEMORY_APERTURE_VIOLATION = 41 , HSA_STATUS_ERROR_ILLEGAL_INSTRUCTION = 42 , HSA_STATUS_ERROR_MEMORY_FAULT = 43 , HSA_STATUS_CU_MASK_REDUCED = 44 , HSA_STATUS_ERROR_OUT_OF_REGISTERS = 45 }
	Enumeration constants added to ::hsa_status_t. More...

enum	hsa_amd_iommu_version_t { HSA_IOMMU_SUPPORT_NONE = 0 , HSA_IOMMU_SUPPORT_V2 = 1 }
	IOMMU version supported. More...

enum	hsa_amd_agent_info_t { HSA_AMD_AGENT_INFO_CHIP_ID = 0xA000 , HSA_AMD_AGENT_INFO_CACHELINE_SIZE = 0xA001 , HSA_AMD_AGENT_INFO_COMPUTE_UNIT_COUNT = 0xA002 , HSA_AMD_AGENT_INFO_MAX_CLOCK_FREQUENCY = 0xA003 , HSA_AMD_AGENT_INFO_DRIVER_NODE_ID = 0xA004 , HSA_AMD_AGENT_INFO_MAX_ADDRESS_WATCH_POINTS = 0xA005 , HSA_AMD_AGENT_INFO_BDFID = 0xA006 , HSA_AMD_AGENT_INFO_MEMORY_WIDTH = 0xA007 , HSA_AMD_AGENT_INFO_MEMORY_MAX_FREQUENCY = 0xA008 , HSA_AMD_AGENT_INFO_PRODUCT_NAME = 0xA009 , HSA_AMD_AGENT_INFO_MAX_WAVES_PER_CU = 0xA00A , HSA_AMD_AGENT_INFO_NUM_SIMDS_PER_CU = 0xA00B , HSA_AMD_AGENT_INFO_NUM_SHADER_ENGINES = 0xA00C , HSA_AMD_AGENT_INFO_NUM_SHADER_ARRAYS_PER_SE = 0xA00D , HSA_AMD_AGENT_INFO_HDP_FLUSH = 0xA00E , HSA_AMD_AGENT_INFO_DOMAIN = 0xA00F , HSA_AMD_AGENT_INFO_COOPERATIVE_QUEUES = 0xA010 , HSA_AMD_AGENT_INFO_UUID = 0xA011 , HSA_AMD_AGENT_INFO_ASIC_REVISION = 0xA012 , HSA_AMD_AGENT_INFO_SVM_DIRECT_HOST_ACCESS = 0xA013 , HSA_AMD_AGENT_INFO_COOPERATIVE_COMPUTE_UNIT_COUNT = 0xA014 , HSA_AMD_AGENT_INFO_MEMORY_AVAIL = 0xA015 , HSA_AMD_AGENT_INFO_TIMESTAMP_FREQUENCY = 0xA016 , HSA_AMD_AGENT_INFO_ASIC_FAMILY_ID = 0xA107 , HSA_AMD_AGENT_INFO_UCODE_VERSION = 0xA108 , HSA_AMD_AGENT_INFO_SDMA_UCODE_VERSION = 0xA109 , HSA_AMD_AGENT_INFO_NUM_SDMA_ENG = 0xA10A , HSA_AMD_AGENT_INFO_NUM_SDMA_XGMI_ENG = 0xA10B , HSA_AMD_AGENT_INFO_IOMMU_SUPPORT = 0xA110 , HSA_AMD_AGENT_INFO_NUM_XCC = 0xA111 , HSA_AMD_AGENT_INFO_DRIVER_UID = 0xA112 , HSA_AMD_AGENT_INFO_NEAREST_CPU = 0xA113 , HSA_AMD_AGENT_INFO_MEMORY_PROPERTIES = 0xA114 , HSA_AMD_AGENT_INFO_AQL_EXTENSIONS = 0xA115 }
	Agent attributes. More...

enum	hsa_amd_agent_memory_properties_t { HSA_AMD_MEMORY_PROPERTY_AGENT_IS_APU = (1 << 0) }
	Agent memory properties attributes. More...

enum	hsa_amd_sdma_engine_id_t { HSA_AMD_SDMA_ENGINE_0 = 0x1 , HSA_AMD_SDMA_ENGINE_1 = 0x2 , HSA_AMD_SDMA_ENGINE_2 = 0x4 , HSA_AMD_SDMA_ENGINE_3 = 0x8 , HSA_AMD_SDMA_ENGINE_4 = 0x10 , HSA_AMD_SDMA_ENGINE_5 = 0x20 , HSA_AMD_SDMA_ENGINE_6 = 0x40 , HSA_AMD_SDMA_ENGINE_7 = 0x80 , HSA_AMD_SDMA_ENGINE_8 = 0x100 , HSA_AMD_SDMA_ENGINE_9 = 0x200 , HSA_AMD_SDMA_ENGINE_10 = 0x400 , HSA_AMD_SDMA_ENGINE_11 = 0x800 , HSA_AMD_SDMA_ENGINE_12 = 0x1000 , HSA_AMD_SDMA_ENGINE_13 = 0x2000 , HSA_AMD_SDMA_ENGINE_14 = 0x4000 , HSA_AMD_SDMA_ENGINE_15 = 0x8000 }
	SDMA engine IDs unique by single set bit position. More...

enum	hsa_amd_region_info_t { HSA_AMD_REGION_INFO_HOST_ACCESSIBLE = 0xA000 , HSA_AMD_REGION_INFO_BASE = 0xA001 , HSA_AMD_REGION_INFO_BUS_WIDTH = 0xA002 , HSA_AMD_REGION_INFO_MAX_CLOCK_FREQUENCY = 0xA003 }
	Region attributes. More...

enum	hsa_amd_coherency_type_t { HSA_AMD_COHERENCY_TYPE_COHERENT = 0 , HSA_AMD_COHERENCY_TYPE_NONCOHERENT = 1 }
	Coherency attributes of fine grain region. More...

enum	hsa_amd_signal_attribute_t { HSA_AMD_SIGNAL_AMD_GPU_ONLY = 1 , HSA_AMD_SIGNAL_IPC = 2 }
	Signal attribute flags. More...

enum	hsa_amd_segment_t { HSA_AMD_SEGMENT_GLOBAL = 0 , HSA_AMD_SEGMENT_READONLY = 1 , HSA_AMD_SEGMENT_PRIVATE = 2 , HSA_AMD_SEGMENT_GROUP = 3 }
	Memory segments associated with a memory pool. More...

enum	hsa_amd_memory_pool_global_flag_t { HSA_AMD_MEMORY_POOL_GLOBAL_FLAG_KERNARG_INIT = 1 , HSA_AMD_MEMORY_POOL_GLOBAL_FLAG_FINE_GRAINED = 2 , HSA_AMD_MEMORY_POOL_GLOBAL_FLAG_COARSE_GRAINED = 4 , HSA_AMD_MEMORY_POOL_GLOBAL_FLAG_EXTENDED_SCOPE_FINE_GRAINED = 8 }

enum	hsa_amd_memory_pool_location_t { HSA_AMD_MEMORY_POOL_LOCATION_CPU = 0 , HSA_AMD_MEMORY_POOL_LOCATION_GPU = 1 }

enum	hsa_amd_memory_pool_info_t { HSA_AMD_MEMORY_POOL_INFO_SEGMENT = 0 , HSA_AMD_MEMORY_POOL_INFO_GLOBAL_FLAGS = 1 , HSA_AMD_MEMORY_POOL_INFO_SIZE = 2 , HSA_AMD_MEMORY_POOL_INFO_RUNTIME_ALLOC_ALLOWED = 5 , HSA_AMD_MEMORY_POOL_INFO_RUNTIME_ALLOC_GRANULE = 6 , HSA_AMD_MEMORY_POOL_INFO_RUNTIME_ALLOC_ALIGNMENT = 7 , HSA_AMD_MEMORY_POOL_INFO_ACCESSIBLE_BY_ALL = 15 , HSA_AMD_MEMORY_POOL_INFO_ALLOC_MAX_SIZE = 16 , HSA_AMD_MEMORY_POOL_INFO_LOCATION = 17 , HSA_AMD_MEMORY_POOL_INFO_RUNTIME_ALLOC_REC_GRANULE = 18 }
	Memory pool features. More...

enum	hsa_amd_memory_pool_flag_t { HSA_AMD_MEMORY_POOL_STANDARD_FLAG = 0 , HSA_AMD_MEMORY_POOL_PCIE_FLAG = 1 }
	Memory pool flag used to specify allocation directives. More...

enum	hsa_amd_copy_direction_t { hsaHostToHost = 0 , hsaHostToDevice = 1 , hsaDeviceToHost = 2 , hsaDeviceToDevice = 3 }

enum	hsa_amd_memory_pool_access_t { HSA_AMD_MEMORY_POOL_ACCESS_NEVER_ALLOWED = 0 , HSA_AMD_MEMORY_POOL_ACCESS_ALLOWED_BY_DEFAULT = 1 , HSA_AMD_MEMORY_POOL_ACCESS_DISALLOWED_BY_DEFAULT = 2 }
	Type of accesses to a memory pool from a given agent. More...

enum	hsa_amd_link_info_type_t { HSA_AMD_LINK_INFO_TYPE_HYPERTRANSPORT = 0 , HSA_AMD_LINK_INFO_TYPE_QPI = 1 , HSA_AMD_LINK_INFO_TYPE_PCIE = 2 , HSA_AMD_LINK_INFO_TYPE_INFINBAND = 3 , HSA_AMD_LINK_INFO_TYPE_XGMI = 4 }
	Properties of the relationship between an agent a memory pool. More...

enum	hsa_amd_agent_memory_pool_info_t { HSA_AMD_AGENT_MEMORY_POOL_INFO_ACCESS = 0 , HSA_AMD_AGENT_MEMORY_POOL_INFO_NUM_LINK_HOPS = 1 , HSA_AMD_AGENT_MEMORY_POOL_INFO_LINK_INFO = 2 }
	Properties of the relationship between an agent a memory pool. More...

enum	hsa_amd_pointer_type_t { HSA_EXT_POINTER_TYPE_UNKNOWN = 0 , HSA_EXT_POINTER_TYPE_HSA = 1 , HSA_EXT_POINTER_TYPE_LOCKED = 2 , HSA_EXT_POINTER_TYPE_GRAPHICS = 3 , HSA_EXT_POINTER_TYPE_IPC = 4 }
	Denotes the type of memory in a pointer info query. More...

enum	hsa_amd_event_type_t { HSA_AMD_GPU_MEMORY_FAULT_EVENT = 0 , HSA_AMD_GPU_HW_EXCEPTION_EVENT }
	GPU system event type. More...

enum	hsa_amd_memory_fault_reason_t { HSA_AMD_MEMORY_FAULT_PAGE_NOT_PRESENT = 1 << 0 , HSA_AMD_MEMORY_FAULT_READ_ONLY = 1 << 1 , HSA_AMD_MEMORY_FAULT_NX = 1 << 2 , HSA_AMD_MEMORY_FAULT_HOST_ONLY = 1 << 3 , HSA_AMD_MEMORY_FAULT_DRAMECC = 1 << 4 , HSA_AMD_MEMORY_FAULT_IMPRECISE = 1 << 5 , HSA_AMD_MEMORY_FAULT_SRAMECC = 1 << 6 , HSA_AMD_MEMORY_FAULT_HANG = 1U << 31 }
	Flags denoting the cause of a memory fault. More...

enum	hsa_amd_hw_exception_reset_type_t { HSA_AMD_HW_EXCEPTION_RESET_TYPE_OTHER = 1 << 0 }
	Flags denoting the type of a HW exception. More...

enum	hsa_amd_hw_exception_reset_cause_t { HSA_AMD_HW_EXCEPTION_CAUSE_GPU_HANG = 1 << 0 , HSA_AMD_HW_EXCEPTION_CAUSE_ECC = 1 << 1 }
	Flags denoting the cause of a HW exception. More...

enum	hsa_amd_queue_priority_t { HSA_AMD_QUEUE_PRIORITY_LOW = 0 , HSA_AMD_QUEUE_PRIORITY_NORMAL = 1 , HSA_AMD_QUEUE_PRIORITY_HIGH = 2 }
	Per-queue dispatch and wavefront scheduling priority. More...

enum	hsa_amd_svm_model_t { HSA_AMD_SVM_GLOBAL_FLAG_FINE_GRAINED = 0 , HSA_AMD_SVM_GLOBAL_FLAG_COARSE_GRAINED = 1 , HSA_AMD_SVM_GLOBAL_FLAG_INDETERMINATE = 2 }

enum	hsa_amd_svm_attribute_t { HSA_AMD_SVM_ATTRIB_GLOBAL_FLAG = 0 , HSA_AMD_SVM_ATTRIB_READ_ONLY = 1 , HSA_AMD_SVM_ATTRIB_HIVE_LOCAL = 2 , HSA_AMD_SVM_ATTRIB_MIGRATION_GRANULARITY = 3 , HSA_AMD_SVM_ATTRIB_PREFERRED_LOCATION = 4 , HSA_AMD_SVM_ATTRIB_PREFETCH_LOCATION = 5 , HSA_AMD_SVM_ATTRIB_READ_MOSTLY = 6 , HSA_AMD_SVM_ATTRIB_GPU_EXEC = 7 , HSA_AMD_SVM_ATTRIB_AGENT_ACCESSIBLE = 0x200 , HSA_AMD_SVM_ATTRIB_AGENT_ACCESSIBLE_IN_PLACE = 0x201 , HSA_AMD_SVM_ATTRIB_AGENT_NO_ACCESS = 0x202 , HSA_AMD_SVM_ATTRIB_ACCESS_QUERY = 0x203 }

enum	hsa_amd_memory_type_t { MEMORY_TYPE_NONE , MEMORY_TYPE_PINNED }

Functions
	return ((uint8_t *) value)[index] &(1<< subBit)

hsa_status_t HSA_API	hsa_amd_coherency_get_type (hsa_agent_t agent, hsa_amd_coherency_type_t *type)
	Get the coherency type of the fine grain region of an agent. More...

hsa_status_t HSA_API	hsa_amd_coherency_set_type (hsa_agent_t agent, hsa_amd_coherency_type_t type)
	Set the coherency type of the fine grain region of an agent. Deprecated. This is supported on KV platforms. For backward compatibility other platforms will spuriously succeed. More...

hsa_status_t HSA_API	hsa_amd_profiling_set_profiler_enabled (hsa_queue_t *queue, int enable)
	Enable or disable profiling capability of a queue. More...

hsa_status_t HSA_API	hsa_amd_profiling_async_copy_enable (bool enable)
	Enable or disable asynchronous memory copy profiling. More...

hsa_status_t HSA_API	hsa_amd_profiling_get_dispatch_time (hsa_agent_t agent, hsa_signal_t signal, hsa_amd_profiling_dispatch_time_t *time)
	Retrieve packet processing time stamps. More...

hsa_status_t HSA_API	hsa_amd_profiling_get_async_copy_time (hsa_signal_t signal, hsa_amd_profiling_async_copy_time_t *time)
	Retrieve asynchronous copy timestamps. More...

hsa_status_t HSA_API	hsa_amd_profiling_convert_tick_to_system_domain (hsa_agent_t agent, uint64_t agent_tick, uint64_t *system_tick)
	Computes the frequency ratio and offset between the agent clock and HSA system clock and converts the agent's tick to HSA system domain tick. More...

hsa_status_t HSA_API	hsa_amd_signal_create (hsa_signal_value_t initial_value, uint32_t num_consumers, const hsa_agent_t consumers, uint64_t attributes, hsa_signal_t signal)
	Create a signal with specific attributes. More...

hsa_status_t	hsa_amd_signal_value_pointer (hsa_signal_t signal, volatile hsa_signal_value_t **value_ptr)
	Returns a pointer to the value of a signal. More...

hsa_status_t HSA_API	hsa_amd_signal_async_handler (hsa_signal_t signal, hsa_signal_condition_t cond, hsa_signal_value_t value, hsa_amd_signal_handler handler, void *arg)
	Register asynchronous signal handler function. More...

hsa_status_t HSA_API	hsa_amd_async_function (void(callback)(void arg), void *arg)
	Call a function asynchronously. More...

uint32_t HSA_API	hsa_amd_signal_wait_any (uint32_t signal_count, hsa_signal_t signals, hsa_signal_condition_t conds, hsa_signal_value_t values, uint64_t timeout_hint, hsa_wait_state_t wait_hint, hsa_signal_value_t satisfying_value)
	Wait for any signal-condition pair to be satisfied. More...

hsa_status_t HSA_API	hsa_amd_image_get_info_max_dim (hsa_agent_t agent, hsa_agent_info_t attribute, void *value)
	Query image limits. More...

hsa_status_t HSA_API	hsa_amd_queue_cu_set_mask (const hsa_queue_t queue, uint32_t num_cu_mask_count, const uint32_t cu_mask)
	Set a queue's CU affinity mask. More...

hsa_status_t HSA_API	hsa_amd_queue_cu_get_mask (const hsa_queue_t queue, uint32_t num_cu_mask_count, uint32_t cu_mask)
	Retrieve a queue's CU affinity mask. More...

hsa_status_t HSA_API	hsa_amd_memory_pool_get_info (hsa_amd_memory_pool_t memory_pool, hsa_amd_memory_pool_info_t attribute, void *value)
	Get the current value of an attribute of a memory pool. More...

hsa_status_t HSA_API	hsa_amd_agent_iterate_memory_pools (hsa_agent_t agent, hsa_status_t(callback)(hsa_amd_memory_pool_t memory_pool, void data), void *data)
	Iterate over the memory pools associated with a given agent, and invoke an application-defined callback on every iteration. More...

hsa_status_t HSA_API	hsa_amd_memory_pool_allocate (hsa_amd_memory_pool_t memory_pool, size_t size, uint32_t flags, void **ptr)
	Allocate a block of memory (or buffer) in the specified pool. More...

hsa_status_t HSA_API	hsa_amd_memory_pool_free (void *ptr)
	Deallocate a block of memory previously allocated using hsa_amd_memory_pool_allocate. More...

hsa_status_t HSA_API	hsa_amd_memory_async_copy (void dst, hsa_agent_t dst_agent, const void src, hsa_agent_t src_agent, size_t size, uint32_t num_dep_signals, const hsa_signal_t *dep_signals, hsa_signal_t completion_signal)
	Asynchronously copy a block of memory from the location pointed to by `src` on the `src_agent` to the memory block pointed to by `dst` on the `dst_agent`. Because the DMA engines used may not be in the same coherency domain, the caller must ensure that buffers are system-level coherent. In general this requires the sending device to have released the buffer to system scope prior to executing the copy API and the receiving device must execute a system scope acquire fence prior to use of the destination buffer. More...

hsa_status_t HSA_API	hsa_amd_memory_async_copy_on_engine (void dst, hsa_agent_t dst_agent, const void src, hsa_agent_t src_agent, size_t size, uint32_t num_dep_signals, const hsa_signal_t *dep_signals, hsa_signal_t completion_signal, hsa_amd_sdma_engine_id_t engine_id, bool force_copy_on_sdma)
	Asynchronously copy a block of memory from the location pointed to by `src` on the `src_agent` to the memory block pointed to by `dst` on the `dst_agent` on engine_id. More...

hsa_status_t HSA_API	hsa_amd_memory_copy_engine_status (hsa_agent_t dst_agent, hsa_agent_t src_agent, uint32_t *engine_ids_mask)
	Reports the availability of SDMA copy engines. More...

hsa_status_t HSA_API	hsa_amd_memory_async_copy_rect (const hsa_pitched_ptr_t dst, const hsa_dim3_t dst_offset, const hsa_pitched_ptr_t src, const hsa_dim3_t src_offset, const hsa_dim3_t range, hsa_agent_t copy_agent, hsa_amd_copy_direction_t dir, uint32_t num_dep_signals, const hsa_signal_t dep_signals, hsa_signal_t completion_signal)

hsa_status_t HSA_API	hsa_amd_agent_memory_pool_get_info (hsa_agent_t agent, hsa_amd_memory_pool_t memory_pool, hsa_amd_agent_memory_pool_info_t attribute, void *value)
	Get the current value of an attribute of the relationship between an agent and a memory pool. More...

hsa_status_t HSA_API	hsa_amd_agents_allow_access (uint32_t num_agents, const hsa_agent_t agents, const uint32_t flags, const void *ptr)
	Enable direct access to a buffer from a given set of agents. More...

hsa_status_t HSA_API	hsa_amd_memory_pool_can_migrate (hsa_amd_memory_pool_t src_memory_pool, hsa_amd_memory_pool_t dst_memory_pool, bool *result)
	Query if buffers currently located in some memory pool can be relocated to a destination memory pool. More...

hsa_status_t HSA_API	hsa_amd_memory_migrate (const void *ptr, hsa_amd_memory_pool_t memory_pool, uint32_t flags)
	Relocate a buffer to a new memory pool. More...

hsa_status_t HSA_API	hsa_amd_memory_lock (void host_ptr, size_t size, hsa_agent_t agents, int num_agent, void **agent_ptr)
	Pin a host pointer allocated by C/C++ or OS allocator (i.e. ordinary system DRAM) and return a new pointer accessible by the `agents`. If the `host_ptr` overlaps with previously locked memory, then the overlap area is kept locked (i.e multiple mappings are permitted). In this case, the same input `host_ptr` may give different locked `agent_ptr` and when it does, they are not necessarily coherent (i.e. accessing either `agent_ptr` is not equivalent). Accesses to `agent_ptr` are coarse grained. More...

hsa_status_t HSA_API	hsa_amd_memory_lock_to_pool (void host_ptr, size_t size, hsa_agent_t agents, int num_agent, hsa_amd_memory_pool_t pool, uint32_t flags, void **agent_ptr)
	Pin a host pointer allocated by C/C++ or OS allocator (i.e. ordinary system DRAM) and return a new pointer accessible by the `agents`. If the `host_ptr` overlaps with previously locked memory, then the overlap area is kept locked (i.e. multiple mappings are permitted). In this case, the same input `host_ptr` may give different locked `agent_ptr` and when it does, they are not necessarily coherent (i.e. accessing either `agent_ptr` is not equivalent). Acesses to the memory via `agent_ptr` have the same access properties as memory allocated from `pool` as determined by hsa_amd_memory_pool_get_info and hsa_amd_agent_memory_pool_get_info (ex. coarse/fine grain, platform atomic support, link info). Physical composition and placement of the memory (ex. page size, NUMA binding) is not changed. More...

hsa_status_t HSA_API	hsa_amd_memory_unlock (void *host_ptr)
	Unpin the host pointer previously pinned via hsa_amd_memory_lock or hsa_amd_memory_lock_to_pool. More...

hsa_status_t HSA_API	hsa_amd_memory_fill (void *ptr, uint32_t value, size_t count)
	Sets the first `count` of uint32_t of the block of memory pointed by `ptr` to the specified `value`. More...

hsa_status_t HSA_API	hsa_amd_interop_map_buffer (uint32_t num_agents, hsa_agent_t agents, int interop_handle, uint32_t flags, size_t size, void *ptr, size_t metadata_size, const void **metadata)
	Maps an interop object into the HSA flat address space and establishes memory residency. The metadata pointer is valid during the lifetime of the map (until hsa_amd_interop_unmap_buffer is called). Multiple calls to hsa_amd_interop_map_buffer with the same interop_handle result in multiple mappings with potentially different addresses and different metadata pointers. Concurrent operations on these addresses are not coherent. Memory must be fenced to system scope to ensure consistency, between mappings and with any views of this buffer in the originating software stack. More...

hsa_status_t HSA_API	hsa_amd_interop_unmap_buffer (void *ptr)
	Removes a previously mapped interop object from HSA's flat address space. Ends lifetime for the mapping's associated metadata pointer. More...

hsa_status_t HSA_API	hsa_amd_image_create (hsa_agent_t agent, const hsa_ext_image_descriptor_t image_descriptor, const hsa_amd_image_descriptor_t image_layout, const void image_data, hsa_access_permission_t access_permission, hsa_ext_image_t image)
	Creates an image from an opaque vendor specific image format. Does not modify data at image_data. Intended initially for accessing interop images. More...

hsa_status_t HSA_API	hsa_amd_pointer_info (const void ptr, hsa_amd_pointer_info_t info, void (alloc)(size_t), uint32_t num_agents_accessible, hsa_agent_t *accessible)
	Retrieves information about the allocation referenced by the given pointer. Optionally returns the number and list of agents which can directly access the allocation. In case this virtual address is unknown, the pointer type returned will be HSA_EXT_POINTER_TYPE_UNKNOWN and the only fields that are valid after hsa_amd_pointer_info returns are size and type. More...

hsa_status_t HSA_API	hsa_amd_pointer_info_set_userdata (const void ptr, void userdata)
	Associates an arbitrary pointer with an allocation known to ROCr. The pointer can be fetched by hsa_amd_pointer_info in the userData field. More...

hsa_status_t HSA_API	hsa_amd_ipc_memory_create (void ptr, size_t len, hsa_amd_ipc_memory_t handle)
	Prepares an allocation for interprocess sharing and creates a handle of type hsa_amd_ipc_memory_t uniquely identifying the allocation. A handle is valid while the allocation it references remains accessible in any process. In general applications should confirm that a shared memory region has been attached (via hsa_amd_ipc_memory_attach) in the remote process prior to releasing that memory in the local process. Repeated calls for the same allocation may, but are not required to, return unique handles. The allocation needs to be on memory on an agent of type HSA_DEVICE_TYPE_GPU. More...

hsa_status_t HSA_API	hsa_amd_ipc_memory_attach (const hsa_amd_ipc_memory_t handle, size_t len, uint32_t num_agents, const hsa_agent_t mapping_agents, void **mapped_ptr)
	Imports shared memory into the local process and makes it accessible by the given agents. If a shared memory handle is attached multiple times in a process each attach may return a different address. Each returned address is refcounted and requires a matching number of calls to hsa_amd_ipc_memory_detach to release the shared memory mapping. More...

hsa_status_t HSA_API	hsa_amd_ipc_memory_detach (void *mapped_ptr)
	Decrements the reference count for the shared memory mapping and releases access to shared memory imported with hsa_amd_ipc_memory_attach. More...

hsa_status_t HSA_API	hsa_amd_ipc_signal_create (hsa_signal_t signal, hsa_amd_ipc_signal_t *handle)
	Obtains an interprocess sharing handle for a signal. The handle is valid while the signal it references remains valid in any process. In general applications should confirm that the signal has been attached (via hsa_amd_ipc_signal_attach) in the remote process prior to destroying that signal in the local process. Repeated calls for the same signal may, but are not required to, return unique handles. More...

hsa_status_t HSA_API	hsa_amd_ipc_signal_attach (const hsa_amd_ipc_signal_t handle, hsa_signal_t signal)
	Imports an IPC capable signal into the local process. If an IPC signal handle is attached multiple times in a process each attach may return a different signal handle. Each returned signal handle is refcounted and requires a matching number of calls to hsa_signal_destroy to release the shared signal. More...

hsa_status_t HSA_API	hsa_amd_register_system_event_handler (hsa_amd_system_event_callback_t callback, void *data)
	Register AMD GPU event handler. More...

hsa_status_t HSA_API	hsa_amd_queue_set_priority (hsa_queue_t *queue, hsa_amd_queue_priority_t priority)
	Modifies the dispatch and wavefront scheduling prioirty for a given compute queue. The default is HSA_AMD_QUEUE_PRIORITY_NORMAL. More...

hsa_status_t HSA_API	hsa_amd_register_deallocation_callback (void ptr, hsa_amd_deallocation_callback_t callback, void user_data)
	Registers a deallocation notifier monitoring for release of agent accessible address `ptr`. If successful, `callback` will be invoked when `ptr` is removed from accessibility from all agents. More...

hsa_status_t HSA_API	hsa_amd_deregister_deallocation_callback (void *ptr, hsa_amd_deallocation_callback_t callback)
	Removes a deallocation notifier previously registered with hsa_amd_register_deallocation_callback. Arguments must be identical to those given in hsa_amd_register_deallocation_callback. More...

hsa_status_t	hsa_amd_svm_attributes_set (void ptr, size_t size, hsa_amd_svm_attribute_pair_t attribute_list, size_t attribute_count)
	Sets SVM memory attributes. More...

hsa_status_t	hsa_amd_svm_attributes_get (void ptr, size_t size, hsa_amd_svm_attribute_pair_t attribute_list, size_t attribute_count)
	Gets SVM memory attributes. More...

hsa_status_t	hsa_amd_svm_prefetch_async (void ptr, size_t size, hsa_agent_t agent, uint32_t num_dep_signals, const hsa_signal_t dep_signals, hsa_signal_t completion_signal)
	Asynchronously migrates memory to an agent. More...

hsa_status_t	hsa_amd_spm_acquire (hsa_agent_t preferred_agent)
	Acquire Stream Performance Monitor on an agent. More...

hsa_status_t	hsa_amd_spm_release (hsa_agent_t preferred_agent)
	Release Stream Performance Monitor on an agent. More...

hsa_status_t	hsa_amd_spm_set_dest_buffer (hsa_agent_t preferred_agent, size_t size_in_bytes, uint32_t timeout, uint32_t size_copied, void dest, bool is_data_loss)
	Set up the current destination user mode buffer for stream performance counter data. KFD will start writing SPM data into the destination buffer. KFD will continue to copy data into the current destination buffer until any of the following functions are called. More...

hsa_status_t	hsa_amd_portable_export_dmabuf (const void ptr, size_t size, int dmabuf, uint64_t *offset)
	Obtains an OS specific, vendor neutral, handle to a memory allocation. More...

hsa_status_t	hsa_amd_portable_close_dmabuf (int dmabuf)
	Closes an OS specific, vendor neutral, handle to a memory allocation. More...

hsa_status_t	hsa_amd_vmem_address_reserve (void **va, size_t size, uint64_t address, uint64_t flags)
	Allocate a reserved address range. More...

hsa_status_t	hsa_amd_vmem_address_free (void *va, size_t size)
	Free a reserved address range. More...

hsa_status_t	hsa_amd_vmem_handle_create (hsa_amd_memory_pool_t pool, size_t size, hsa_amd_memory_type_t type, uint64_t flags, hsa_amd_vmem_alloc_handle_t *memory_handle)
	Create a virtual memory handle. More...

hsa_status_t	hsa_amd_vmem_handle_release (hsa_amd_vmem_alloc_handle_t memory_handle)
	Release a virtual memory handle. More...

hsa_status_t	hsa_amd_vmem_map (void *va, size_t size, size_t in_offset, hsa_amd_vmem_alloc_handle_t memory_handle, uint64_t flags)
	Map a virtual memory handle. More...

hsa_status_t	hsa_amd_vmem_unmap (void *va, size_t size)
	Unmap a virtual memory handle. More...

hsa_status_t	hsa_amd_vmem_set_access (void va, size_t size, const hsa_amd_memory_access_desc_t desc, size_t desc_cnt)
	Make a memory mapping accessible. More...

hsa_status_t	hsa_amd_vmem_get_access (void va, hsa_access_permission_t perms, hsa_agent_t agent_handle)
	Get current access permissions for memory mapping. More...

hsa_status_t	hsa_amd_vmem_export_shareable_handle (int *dmabuf_fd, hsa_amd_vmem_alloc_handle_t handle, uint64_t flags)
	Get an exportable shareable handle. More...

hsa_status_t	hsa_amd_vmem_import_shareable_handle (int dmabuf_fd, hsa_amd_vmem_alloc_handle_t *handle)
	Import a shareable handle. More...

hsa_status_t	hsa_amd_vmem_retain_alloc_handle (hsa_amd_vmem_alloc_handle_t memory_handle, void addr)
	Returns memory handle for mapped memory. More...

hsa_status_t	hsa_amd_vmem_get_alloc_properties_from_handle (hsa_amd_vmem_alloc_handle_t memory_handle, hsa_amd_memory_pool_t pool, hsa_amd_memory_type_t type)

hsa_status_t HSA_API	hsa_amd_agent_set_async_scratch_limit (hsa_agent_t agent, size_t threshold)
	Set the asynchronous scratch limit threshold on all the queues for this agent. Dispatches that are enqueued on HW queues on this agent that are smaller than threshold will not result in a scratch use-once method. More...

Variables
static __inline__ uint32_t	bit

unsigned int	subBit = bit % 8

Macro Definition Documentation

◆ HSA_AMD_INTERFACE_VERSION_MAJOR

#define HSA_AMD_INTERFACE_VERSION_MAJOR 1

◆ HSA_AMD_INTERFACE_VERSION_MINOR

#define HSA_AMD_INTERFACE_VERSION_MINOR 4

Typedef Documentation

◆ hsa_amd_deallocation_callback_t

typedef void(* hsa_amd_deallocation_callback_t) (void *ptr, void *user_data)

Deallocation notifier function type.

◆ hsa_amd_ipc_signal_t

typedef hsa_amd_ipc_memory_t hsa_amd_ipc_signal_t

256-bit process independent identifier for a ROCr IPC signal.

◆ hsa_amd_signal_handler

typedef bool(* hsa_amd_signal_handler) (hsa_signal_value_t value, void *arg)

Asyncronous signal handler function type.

Type definition of callback function to be used with hsa_amd_signal_async_handler. This callback is invoked if the associated signal and condition are met. The callback receives the value of the signal which satisfied the associated wait condition and a user provided value. If the callback returns true then the callback will be called again if the associated signal and condition are satisfied again. If the callback returns false then it will not be called again.

Parameters

[in]	value	Contains the value of the signal observed by hsa_amd_signal_async_handler which caused the signal handler to be invoked.
[in]	arg	Contains the user provided value given when the signal handler was registered with hsa_amd_signal_async_handler

Return values

true	resumes monitoring the signal with this handler (as if calling hsa_amd_signal_async_handler again with identical parameters)
false	stops monitoring the signal with this handler (handler will not be called again for this signal)

◆ hsa_amd_system_event_callback_t

typedef hsa_status_t(* hsa_amd_system_event_callback_t) (const hsa_amd_event_t *event, void *data)

Enumeration Type Documentation

◆ anonymous enum

anonymous enum

Enumeration constants added to ::hsa_status_t.

Remarks: Additions to hsa_status_t

Enumerator
HSA_STATUS_ERROR_INVALID_MEMORY_POOL	The memory pool is invalid.
HSA_STATUS_ERROR_MEMORY_APERTURE_VIOLATION	Agent accessed memory beyond the maximum legal address.
HSA_STATUS_ERROR_ILLEGAL_INSTRUCTION	Agent executed an invalid shader instruction.
HSA_STATUS_ERROR_MEMORY_FAULT	Agent attempted to access an inaccessible address. See hsa_amd_register_system_event_handler and HSA_AMD_GPU_MEMORY_FAULT_EVENT for more information on illegal accesses.
HSA_STATUS_CU_MASK_REDUCED	The CU mask was successfully set but the mask attempted to enable a CU which was disabled for the process. CUs disabled for the process remain disabled.
HSA_STATUS_ERROR_OUT_OF_REGISTERS	Exceeded number of VGPRs available on this agent

◆ hsa_amd_agent_info_t

enum hsa_amd_agent_info_t

Agent attributes.

Enumerator
HSA_AMD_AGENT_INFO_CHIP_ID	Chip identifier. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_CACHELINE_SIZE	Size of a cacheline in bytes. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_COMPUTE_UNIT_COUNT	The number of compute unit available in the agent. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_MAX_CLOCK_FREQUENCY	The maximum clock frequency of the agent in MHz. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_DRIVER_NODE_ID	Internal driver node identifier. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_MAX_ADDRESS_WATCH_POINTS	Max number of watch points on memory address ranges to generate exception events when the watched addresses are accessed. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_BDFID	Agent BDF_ID, named LocationID in thunk. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_MEMORY_WIDTH	Memory Interface width, the return value type is uint32_t. This attribute is deprecated.
HSA_AMD_AGENT_INFO_MEMORY_MAX_FREQUENCY	Max Memory Clock, the return value type is uint32_t.
HSA_AMD_AGENT_INFO_PRODUCT_NAME	Board name of Agent - populated from MarketingName of Kfd Node The value is an Ascii string of 64 chars.
HSA_AMD_AGENT_INFO_MAX_WAVES_PER_CU	Maximum number of waves possible in a Compute Unit. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_NUM_SIMDS_PER_CU	Number of SIMD's per compute unit CU The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_NUM_SHADER_ENGINES	Number of Shader Engines (SE) in Gpu The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_NUM_SHADER_ARRAYS_PER_SE	Number of Shader Arrays Per Shader Engines in Gpu The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_HDP_FLUSH	Address of the HDP flush registers. Use of these registers does not conform to the HSA memory model and should be treated with caution. The type of this attribute is hsa_amd_hdp_flush_t.
HSA_AMD_AGENT_INFO_DOMAIN	PCIe domain for the agent. Pairs with HSA_AMD_AGENT_INFO_BDFID to give the full physical location of the Agent. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_COOPERATIVE_QUEUES	Queries for support of cooperative queues. See ::HSA_QUEUE_TYPE_COOPERATIVE. The type of this attribute is bool.
HSA_AMD_AGENT_INFO_UUID	Queries UUID of an agent. The value is an Ascii string with a maximum of 21 chars including NUL. The string value consists of two parts: header and body. The header identifies device type (GPU, CPU, DSP) while body encodes UUID as a 16 digit hex string Agents that do not support UUID will return the string "GPU-XX" or "CPU-XX" or "DSP-XX" depending upon their device type ::hsa_device_type_t
HSA_AMD_AGENT_INFO_ASIC_REVISION	Queries for the ASIC revision of an agent. The value is an integer that increments for each revision. This can be used by user-level software to change how it operates, depending on the hardware version. This allows selective workarounds for hardware errata. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_SVM_DIRECT_HOST_ACCESS	Queries whether or not the host can directly access SVM memory that is physically resident in the agent's local memory. The type of this attribute is bool.
HSA_AMD_AGENT_INFO_COOPERATIVE_COMPUTE_UNIT_COUNT	Some processors support more CUs than can reliably be used in a cooperative dispatch. This queries the count of CUs which are fully enabled for cooperative dispatch. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_MEMORY_AVAIL	Queries the amount of memory available in bytes accross all global pools owned by the agent. The type of this attribute is uint64_t.
HSA_AMD_AGENT_INFO_TIMESTAMP_FREQUENCY	Timestamp value increase rate, in Hz. The timestamp (clock) frequency is in the range 1-400MHz. The type of this attribute is uint64_t.
HSA_AMD_AGENT_INFO_ASIC_FAMILY_ID	Queries for the ASIC family ID of an agent. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_UCODE_VERSION	Queries for the Packet Processor(CP Firmware) ucode version of an agent. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_SDMA_UCODE_VERSION	Queries for the SDMA engine ucode of an agent. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_NUM_SDMA_ENG	Queries the number of SDMA engines. If HSA_AMD_AGENT_INFO_NUM_SDMA_XGMI_ENG query returns non-zero, this query returns the the number of SDMA engines optimized for host to device bidirectional traffic. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_NUM_SDMA_XGMI_ENG	Queries the number of additional SDMA engines optimized for D2D xGMI copies. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_IOMMU_SUPPORT	Queries for version of IOMMU supported by agent. The type of this attribute is hsa_amd_iommu_version_t.
HSA_AMD_AGENT_INFO_NUM_XCC	Queries for number of XCCs within the agent. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_DRIVER_UID	Queries for driver unique identifier. The type of this attribute is uint32_t.
HSA_AMD_AGENT_INFO_NEAREST_CPU	Returns the hsa_agent_t of the nearest CPU agent The type of this attribute is hsa_agent_t.
HSA_AMD_AGENT_INFO_MEMORY_PROPERTIES	Bit-mask indicating memory properties of this agent. A memory property is set if the flag bit is set at that position. User may use the hsa_flag_isset64 macro to verify whether a flag is set. The type of this attribute is uint8_t[8].
HSA_AMD_AGENT_INFO_AQL_EXTENSIONS	Bit-mask indicating AQL Extensions supported by this agent. An AQL extension is set if the flag bit is set at that position. User may use the hsa_flag_isset64 macro to verify whether a flag is set. The type of this attribute is uint8_t[8].

◆ hsa_amd_agent_memory_pool_info_t

enum hsa_amd_agent_memory_pool_info_t

Properties of the relationship between an agent a memory pool.

Enumerator

HSA_AMD_AGENT_MEMORY_POOL_INFO_ACCESS

Access to buffers located in the memory pool. The type of this attribute is hsa_amd_memory_pool_access_t.

An agent can always directly access buffers currently located in a memory pool that is associated (the memory_pool is one of the values returned by hsa_amd_agent_iterate_memory_pools on the agent) with that agent. If the buffer is currently located in a memory pool that is not associated with the agent, and the value returned by this function for the given combination of agent and memory pool is not HSA_AMD_MEMORY_POOL_ACCESS_NEVER_ALLOWED, the application still needs to invoke hsa_amd_agents_allow_access in order to gain direct access to the buffer.

If the given agent can directly access buffers the pool, the result is not HSA_AMD_MEMORY_POOL_ACCESS_NEVER_ALLOWED. If the memory pool is associated with the agent, or it is of fined-grained type, the result must not be HSA_AMD_MEMORY_POOL_ACCESS_NEVER_ALLOWED. If the memory pool is not associated with the agent, and does not reside in the global segment, the result must be HSA_AMD_MEMORY_POOL_ACCESS_NEVER_ALLOWED.

HSA_AMD_AGENT_MEMORY_POOL_INFO_NUM_LINK_HOPS

Number of links to hop when accessing the memory pool from the specified agent. The value of this attribute is zero if the memory pool is associated with the agent, or if the access type is HSA_AMD_MEMORY_POOL_ACCESS_NEVER_ALLOWED. The type of this attribute is uint32_t.

HSA_AMD_AGENT_MEMORY_POOL_INFO_LINK_INFO

Details of each link hop when accessing the memory pool starting from the specified agent. The type of this attribute is an array size of HSA_AMD_AGENT_MEMORY_POOL_INFO_NUM_LINK_HOPS with each element containing hsa_amd_memory_pool_link_info_t.

◆ hsa_amd_agent_memory_properties_t

enum hsa_amd_agent_memory_properties_t

Agent memory properties attributes.

Enumerator
HSA_AMD_MEMORY_PROPERTY_AGENT_IS_APU

◆ hsa_amd_coherency_type_t

enum hsa_amd_coherency_type_t

Coherency attributes of fine grain region.

Enumerator
HSA_AMD_COHERENCY_TYPE_COHERENT	Coherent region.
HSA_AMD_COHERENCY_TYPE_NONCOHERENT	Non coherent region.

◆ hsa_amd_copy_direction_t

enum hsa_amd_copy_direction_t

Enumerator
hsaHostToHost
hsaHostToDevice
hsaDeviceToHost
hsaDeviceToDevice

◆ hsa_amd_event_type_t

enum hsa_amd_event_type_t

GPU system event type.

Enumerator
HSA_AMD_GPU_MEMORY_FAULT_EVENT
HSA_AMD_GPU_HW_EXCEPTION_EVENT

◆ hsa_amd_hw_exception_reset_cause_t

enum hsa_amd_hw_exception_reset_cause_t

Flags denoting the cause of a HW exception.

Enumerator
HSA_AMD_HW_EXCEPTION_CAUSE_GPU_HANG
HSA_AMD_HW_EXCEPTION_CAUSE_ECC

◆ hsa_amd_hw_exception_reset_type_t

enum hsa_amd_hw_exception_reset_type_t

Flags denoting the type of a HW exception.

Enumerator
HSA_AMD_HW_EXCEPTION_RESET_TYPE_OTHER

◆ hsa_amd_iommu_version_t

enum hsa_amd_iommu_version_t

IOMMU version supported.

Enumerator
HSA_IOMMU_SUPPORT_NONE	IOMMU not supported
HSA_IOMMU_SUPPORT_V2	IOMMU V2 supported

◆ hsa_amd_link_info_type_t

enum hsa_amd_link_info_type_t

Properties of the relationship between an agent a memory pool.

Enumerator
HSA_AMD_LINK_INFO_TYPE_HYPERTRANSPORT	Hyper-transport bus type.
HSA_AMD_LINK_INFO_TYPE_QPI	QPI bus type.
HSA_AMD_LINK_INFO_TYPE_PCIE	PCIe bus type.
HSA_AMD_LINK_INFO_TYPE_INFINBAND	Infiniband bus type.
HSA_AMD_LINK_INFO_TYPE_XGMI	xGMI link type.

◆ hsa_amd_memory_fault_reason_t

enum hsa_amd_memory_fault_reason_t

Flags denoting the cause of a memory fault.

Enumerator
HSA_AMD_MEMORY_FAULT_PAGE_NOT_PRESENT
HSA_AMD_MEMORY_FAULT_READ_ONLY
HSA_AMD_MEMORY_FAULT_NX
HSA_AMD_MEMORY_FAULT_HOST_ONLY
HSA_AMD_MEMORY_FAULT_DRAMECC
HSA_AMD_MEMORY_FAULT_IMPRECISE
HSA_AMD_MEMORY_FAULT_SRAMECC
HSA_AMD_MEMORY_FAULT_HANG

◆ hsa_amd_memory_pool_access_t

enum hsa_amd_memory_pool_access_t

Type of accesses to a memory pool from a given agent.

Enumerator
HSA_AMD_MEMORY_POOL_ACCESS_NEVER_ALLOWED	The agent cannot directly access any buffer in the memory pool.
HSA_AMD_MEMORY_POOL_ACCESS_ALLOWED_BY_DEFAULT	The agent can directly access a buffer located in the pool; the application does not need to invoke hsa_amd_agents_allow_access.
HSA_AMD_MEMORY_POOL_ACCESS_DISALLOWED_BY_DEFAULT	The agent can directly access a buffer located in the pool, but only if the application has previously requested access to that buffer using hsa_amd_agents_allow_access.

◆ hsa_amd_memory_pool_flag_t

enum hsa_amd_memory_pool_flag_t

Memory pool flag used to specify allocation directives.

Enumerator
HSA_AMD_MEMORY_POOL_STANDARD_FLAG	Allocates memory that conforms to standard HSA memory consistency model
HSA_AMD_MEMORY_POOL_PCIE_FLAG	Allocates fine grain memory type where memory ordering is per point to point connection. Atomic memory operations on these memory buffers are not guaranteed to be visible at system scope.

◆ hsa_amd_memory_pool_global_flag_t

enum hsa_amd_memory_pool_global_flag_t

Enumerator
HSA_AMD_MEMORY_POOL_GLOBAL_FLAG_KERNARG_INIT	The application can use allocations in the memory pool to store kernel arguments, and provide the values for the kernarg segment of a kernel dispatch.
HSA_AMD_MEMORY_POOL_GLOBAL_FLAG_FINE_GRAINED	Updates to memory in this pool conform to HSA memory consistency model. If this flag is set, then HSA_AMD_MEMORY_POOL_GLOBAL_FLAG_COARSE_GRAINED must not be set.
HSA_AMD_MEMORY_POOL_GLOBAL_FLAG_COARSE_GRAINED	Writes to memory in this pool can be performed by a single agent at a time.
HSA_AMD_MEMORY_POOL_GLOBAL_FLAG_EXTENDED_SCOPE_FINE_GRAINED	Updates to memory in this memory pool have extended scope, acting as system-scope atomics for variables in memory regions of this type. Note: On non-compliant systems, device-specific actions may be required for system-scope coherence.

◆ hsa_amd_memory_pool_info_t

enum hsa_amd_memory_pool_info_t

Memory pool features.

Enumerator
HSA_AMD_MEMORY_POOL_INFO_SEGMENT	Segment where the memory pool resides. The type of this attribute is hsa_amd_segment_t.
HSA_AMD_MEMORY_POOL_INFO_GLOBAL_FLAGS	Flag mask. The value of this attribute is undefined if the value of HSA_AMD_MEMORY_POOL_INFO_SEGMENT is not HSA_AMD_SEGMENT_GLOBAL. The type of this attribute is uint32_t, a bit-field of hsa_amd_memory_pool_global_flag_t values.
HSA_AMD_MEMORY_POOL_INFO_SIZE	Size of this pool, in bytes. The type of this attribute is size_t.
HSA_AMD_MEMORY_POOL_INFO_RUNTIME_ALLOC_ALLOWED	Indicates whether memory in this pool can be allocated using hsa_amd_memory_pool_allocate. The type of this attribute is bool. The value of this flag is always false for memory pools in the group and private segments.
HSA_AMD_MEMORY_POOL_INFO_RUNTIME_ALLOC_GRANULE	Allocation granularity of buffers allocated by hsa_amd_memory_pool_allocate in this memory pool. The size of a buffer allocated in this pool is a multiple of the value of this attribute. While this is the minimum size of allocation allowed, it is recommened to use HSA_AMD_MEMORY_POOL_INFO_RUNTIME_ALLOC_REC_GRANULE to obtain the recommended allocation granularity size for this pool. The value of this attribute is only defined if HSA_AMD_MEMORY_POOL_INFO_RUNTIME_ALLOC_ALLOWED is true for this pool. The type of this attribute is size_t.
HSA_AMD_MEMORY_POOL_INFO_RUNTIME_ALLOC_ALIGNMENT	Alignment of buffers allocated by hsa_amd_memory_pool_allocate in this pool. The value of this attribute is only defined if HSA_AMD_MEMORY_POOL_INFO_RUNTIME_ALLOC_ALLOWED is true for this pool, and must be a power of 2. The type of this attribute is size_t.
HSA_AMD_MEMORY_POOL_INFO_ACCESSIBLE_BY_ALL	This memory_pool can be made directly accessible by all the agents in the system (hsa_amd_agent_memory_pool_get_info does not return HSA_AMD_MEMORY_POOL_ACCESS_NEVER_ALLOWED for any agent). The type of this attribute is bool.
HSA_AMD_MEMORY_POOL_INFO_ALLOC_MAX_SIZE	Maximum aggregate allocation size in bytes. The type of this attribute is size_t.
HSA_AMD_MEMORY_POOL_INFO_LOCATION	Location of this memory pool. The type of this attribute is hsa_amd_memory_pool_location_t.
HSA_AMD_MEMORY_POOL_INFO_RUNTIME_ALLOC_REC_GRANULE	Internal block size for allocations. This would also be the recommended granularity size for allocations as this prevents internal fragmentation. The value of this attribute is only defined if HSA_AMD_MEMORY_POOL_INFO_RUNTIME_ALLOC_ALLOWED is true for this pool. The size of this attribute is size_t.

◆ hsa_amd_memory_pool_location_t

enum hsa_amd_memory_pool_location_t

Enumerator
HSA_AMD_MEMORY_POOL_LOCATION_CPU	This memory pool resides on the host (CPU)
HSA_AMD_MEMORY_POOL_LOCATION_GPU	This memory pool resides on a GPU

◆ hsa_amd_memory_type_t

enum hsa_amd_memory_type_t

Enumerator
MEMORY_TYPE_NONE
MEMORY_TYPE_PINNED

◆ hsa_amd_pointer_type_t

enum hsa_amd_pointer_type_t

Denotes the type of memory in a pointer info query.

Enumerator
HSA_EXT_POINTER_TYPE_UNKNOWN
HSA_EXT_POINTER_TYPE_HSA
HSA_EXT_POINTER_TYPE_LOCKED
HSA_EXT_POINTER_TYPE_GRAPHICS
HSA_EXT_POINTER_TYPE_IPC

◆ hsa_amd_queue_priority_t

enum hsa_amd_queue_priority_t

Per-queue dispatch and wavefront scheduling priority.

Enumerator
HSA_AMD_QUEUE_PRIORITY_LOW
HSA_AMD_QUEUE_PRIORITY_NORMAL
HSA_AMD_QUEUE_PRIORITY_HIGH

◆ hsa_amd_region_info_t

enum hsa_amd_region_info_t

Region attributes.

Enumerator
HSA_AMD_REGION_INFO_HOST_ACCESSIBLE	Determine if host can access the region. The type of this attribute is bool.
HSA_AMD_REGION_INFO_BASE	Base address of the region in flat address space.
HSA_AMD_REGION_INFO_BUS_WIDTH	Memory Interface width, the return value type is uint32_t. This attribute is deprecated. Use HSA_AMD_AGENT_INFO_MEMORY_WIDTH.
HSA_AMD_REGION_INFO_MAX_CLOCK_FREQUENCY	Max Memory Clock, the return value type is uint32_t. This attribute is deprecated. Use HSA_AMD_AGENT_INFO_MEMORY_MAX_FREQUENCY.

◆ hsa_amd_sdma_engine_id_t

enum hsa_amd_sdma_engine_id_t

SDMA engine IDs unique by single set bit position.

Enumerator
HSA_AMD_SDMA_ENGINE_0
HSA_AMD_SDMA_ENGINE_1
HSA_AMD_SDMA_ENGINE_2
HSA_AMD_SDMA_ENGINE_3
HSA_AMD_SDMA_ENGINE_4
HSA_AMD_SDMA_ENGINE_5
HSA_AMD_SDMA_ENGINE_6
HSA_AMD_SDMA_ENGINE_7
HSA_AMD_SDMA_ENGINE_8
HSA_AMD_SDMA_ENGINE_9
HSA_AMD_SDMA_ENGINE_10
HSA_AMD_SDMA_ENGINE_11
HSA_AMD_SDMA_ENGINE_12
HSA_AMD_SDMA_ENGINE_13
HSA_AMD_SDMA_ENGINE_14
HSA_AMD_SDMA_ENGINE_15

◆ hsa_amd_segment_t

enum hsa_amd_segment_t

Memory segments associated with a memory pool.

Enumerator
HSA_AMD_SEGMENT_GLOBAL	Global segment. Used to hold data that is shared by all agents.
HSA_AMD_SEGMENT_READONLY	Read-only segment. Used to hold data that remains constant during the execution of a kernel.
HSA_AMD_SEGMENT_PRIVATE	Private segment. Used to hold data that is local to a single work-item.
HSA_AMD_SEGMENT_GROUP	Group segment. Used to hold data that is shared by the work-items of a work-group.

◆ hsa_amd_signal_attribute_t

enum hsa_amd_signal_attribute_t

Signal attribute flags.

Enumerator
HSA_AMD_SIGNAL_AMD_GPU_ONLY	Signal will only be consumed by AMD GPUs. Limits signal consumption to AMD GPU agents only. Ignored if `num_consumers` is not zero (all agents).
HSA_AMD_SIGNAL_IPC	Signal may be used for interprocess communication. IPC signals can be read, written, and waited on from any process. Profiling using an IPC enabled signal is only supported in a single process at a time. Producing profiling data in one process and consuming it in another process is undefined.

◆ hsa_amd_svm_attribute_t

enum hsa_amd_svm_attribute_t

Enumerator
HSA_AMD_SVM_ATTRIB_GLOBAL_FLAG
HSA_AMD_SVM_ATTRIB_READ_ONLY
HSA_AMD_SVM_ATTRIB_HIVE_LOCAL
HSA_AMD_SVM_ATTRIB_MIGRATION_GRANULARITY
HSA_AMD_SVM_ATTRIB_PREFERRED_LOCATION
HSA_AMD_SVM_ATTRIB_PREFETCH_LOCATION
HSA_AMD_SVM_ATTRIB_READ_MOSTLY
HSA_AMD_SVM_ATTRIB_GPU_EXEC
HSA_AMD_SVM_ATTRIB_AGENT_ACCESSIBLE
HSA_AMD_SVM_ATTRIB_AGENT_ACCESSIBLE_IN_PLACE
HSA_AMD_SVM_ATTRIB_AGENT_NO_ACCESS
HSA_AMD_SVM_ATTRIB_ACCESS_QUERY

◆ hsa_amd_svm_model_t

enum hsa_amd_svm_model_t

Enumerator

HSA_AMD_SVM_GLOBAL_FLAG_FINE_GRAINED

Updates to memory with this attribute conform to HSA memory consistency model.

HSA_AMD_SVM_GLOBAL_FLAG_COARSE_GRAINED

Writes to memory with this attribute can be performed by a single agent at a time.

HSA_AMD_SVM_GLOBAL_FLAG_INDETERMINATE

Memory region queried contains subregions with both HSA_AMD_SVM_GLOBAL_FLAG_COARSE_GRAINED and HSA_AMD_SVM_GLOBAL_FLAG_FINE_GRAINED attributes.

This attribute can not be used in hsa_amd_svm_attributes_set. It is a possible return from hsa_amd_svm_attributes_get indicating that the query region contains both coarse and fine grained memory.

Function Documentation

◆ hsa_amd_agent_iterate_memory_pools()

hsa_status_t HSA_API hsa_amd_agent_iterate_memory_pools	(	hsa_agent_t	agent,
		hsa_status_t()(hsa_amd_memory_pool_t memory_pool, void data)	callback,
		void *	data
	)

Iterate over the memory pools associated with a given agent, and invoke an application-defined callback on every iteration.

An agent can directly access buffers located in some memory pool, or be enabled to access them by the application (see hsa_amd_agents_allow_access), yet that memory pool may not be returned by this function for that given agent.

A memory pool of fine-grained type must be associated only with the host.

Parameters

[in]	agent	A valid agent.
[in]	callback	Callback to be invoked on the same thread that called hsa_amd_agent_iterate_memory_pools, serially, once per memory pool that is associated with the agent. The HSA runtime passes two arguments to the callback: the memory pool, and the application data. If `callback` returns a status other than ::HSA_STATUS_SUCCESS for a particular iteration, the traversal stops and hsa_amd_agent_iterate_memory_pools returns that status value.
[in]	data	Application data that is passed to `callback` on every iteration. May be NULL.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_AGENT	The agent is invalid.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	`callback` is NULL.

◆ hsa_amd_agent_memory_pool_get_info()

hsa_status_t HSA_API hsa_amd_agent_memory_pool_get_info	(	hsa_agent_t	agent,
		hsa_amd_memory_pool_t	memory_pool,
		hsa_amd_agent_memory_pool_info_t	attribute,
		void *	value
	)

Get the current value of an attribute of the relationship between an agent and a memory pool.

Parameters

[in]	agent	Agent.
[in]	memory_pool	Memory pool.
[in]	attribute	Attribute to query.
[out]	value	Pointer to a application-allocated buffer where to store the value of the attribute. If the buffer passed by the application is not large enough to hold the value of `attribute`, the behavior is undefined.

Return values

::HSA_STATUS_SUCCESS The function has been executed successfully.

◆ hsa_amd_agent_set_async_scratch_limit()

hsa_status_t HSA_API hsa_amd_agent_set_async_scratch_limit	(	hsa_agent_t	agent,
		size_t	threshold
	)

Set the asynchronous scratch limit threshold on all the queues for this agent. Dispatches that are enqueued on HW queues on this agent that are smaller than threshold will not result in a scratch use-once method.

Increasing this threshold will only increase the internal limit and not cause immediate allocation of additional scratch memory. Decreasing this threshold will result in a release in scratch memory on queues where the current amount of allocated scratch exceeds the new limit.

This API is only supported on devices that support asynchronous scratch reclaim.

Parameters

[in]	agent	A valid agent.
[in]	threshold	Threshold size in bytes

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_AGENT	The agent is invalid.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	This agent does not support asynchronous scratch reclaim

◆ hsa_amd_agents_allow_access()

hsa_status_t HSA_API hsa_amd_agents_allow_access	(	uint32_t	num_agents,
		const hsa_agent_t *	agents,
		const uint32_t *	flags,
		const void *	ptr
	)

Enable direct access to a buffer from a given set of agents.

Upon return, only the listed agents and the agent associated with the buffer's memory pool have direct access to the ptr.

Any agent that has access to the buffer before and after the call to hsa_amd_agents_allow_access will also have access while hsa_amd_agents_allow_access is in progress.

The caller is responsible for ensuring that each agent in the list must be able to access the memory pool containing ptr (using hsa_amd_agent_memory_pool_get_info with HSA_AMD_AGENT_MEMORY_POOL_INFO_ACCESS attribute), otherwise error code is returned.

Parameters

[in]	num_agents	Size of `agents`.
[in]	agents	List of agents. If `num_agents` is 0, this argument is ignored.
[in]	flags	A list of bit-field that is used to specify access information in a per-agent basis. This is currently reserved and must be NULL.
[in]	ptr	A buffer previously allocated using hsa_amd_memory_pool_allocate.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	`num_agents` is 0, or `agents` is NULL, `flags` is not NULL, or attempting to enable access to agent(s) because `ptr` is allocated from an inaccessible pool.

◆ hsa_amd_async_function()

hsa_status_t HSA_API hsa_amd_async_function	(	void()(void arg)	callback,
		void *	arg
	)

Call a function asynchronously.

Provides access to the runtime's asynchronous event handling thread for general asynchronous functions. Functions queued this way are executed in the same manner as if they were a signal handler who's signal is satisfied.

Parameters

[in]	callback	asynchronous function to be invoked
[in]	arg	user provided value which is provided to handler when handler is invoked

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	handler is invalid (NULL)
::HSA_STATUS_ERROR_OUT_OF_RESOURCES	The HSA runtime is out of resources or blocking signals are not supported by the HSA driver component.

◆ hsa_amd_coherency_get_type()

hsa_status_t HSA_API hsa_amd_coherency_get_type	(	hsa_agent_t	agent,
		hsa_amd_coherency_type_t *	type
	)

Get the coherency type of the fine grain region of an agent.

Parameters

[in]	agent	A valid agent.
[out]	type	Pointer to a memory location where the HSA runtime will store the coherency type of the fine grain region.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_AGENT	The agent is invalid.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	`type` is NULL.

◆ hsa_amd_coherency_set_type()

hsa_status_t HSA_API hsa_amd_coherency_set_type	(	hsa_agent_t	agent,
		hsa_amd_coherency_type_t	type
	)

Set the coherency type of the fine grain region of an agent. Deprecated. This is supported on KV platforms. For backward compatibility other platforms will spuriously succeed.

Parameters

[in]	agent	A valid agent.
[in]	type	The coherency type to be set.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_AGENT	The agent is invalid.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	`type` is invalid.

◆ hsa_amd_deregister_deallocation_callback()

hsa_status_t HSA_API hsa_amd_deregister_deallocation_callback	(	void *	ptr,
		hsa_amd_deallocation_callback_t	callback
	)

Removes a deallocation notifier previously registered with hsa_amd_register_deallocation_callback. Arguments must be identical to those given in hsa_amd_register_deallocation_callback.

Parameters

[in]	ptr	Agent accessible address which was monitored for deallocation.
[in]	callback	Notifier to be removed.

Return values

::HSA_STATUS_SUCCESS	The notifier has been removed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	The given notifier was not registered.

◆ hsa_amd_image_create()

hsa_status_t HSA_API hsa_amd_image_create	(	hsa_agent_t	agent,
		const hsa_ext_image_descriptor_t *	image_descriptor,
		const hsa_amd_image_descriptor_t *	image_layout,
		const void *	image_data,
		hsa_access_permission_t	access_permission,
		hsa_ext_image_t *	image
	)

Creates an image from an opaque vendor specific image format. Does not modify data at image_data. Intended initially for accessing interop images.

Parameters

	agent[in]	Agent on which to create the image
[in]	image_descriptor[in]	Vendor specific image format
[in]	image_data	Pointer to image backing store
[in]	access_permission	Access permissions for the image object
[out]	image	Created image object.

Return values

HSA_STATUS_SUCCESS	Image created successfully
HSA_STATUS_ERROR_NOT_INITIALIZED	if HSA is not initialized
HSA_STATUS_ERROR_OUT_OF_RESOURCES	if there is a failure in allocating necessary resources
HSA_STATUS_ERROR_INVALID_ARGUMENT	Bad or mismatched descriptor, null image_data, or mismatched access_permission.

◆ hsa_amd_image_get_info_max_dim()

hsa_status_t HSA_API hsa_amd_image_get_info_max_dim	(	hsa_agent_t	agent,
		hsa_agent_info_t	attribute,
		void *	value
	)

Query image limits.

Parameters

[in]	agent	A valid agent.
[in]	attribute	HSA image info attribute to query.
[out]	value	Pointer to an application-allocated buffer where to store the value of the attribute. If the buffer passed by the application is not large enough to hold the value of `attribute`, the behavior is undefined.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_QUEUE	`value` is NULL or `attribute` < HSA_EXT_AGENT_INFO_IMAGE_1D_MAX_ELEMENTS or `attribute` > HSA_EXT_AGENT_INFO_IMAGE_ARRAY_MAX_LAYERS.

◆ hsa_amd_interop_map_buffer()

hsa_status_t HSA_API hsa_amd_interop_map_buffer	(	uint32_t	num_agents,
		hsa_agent_t *	agents,
		int	interop_handle,
		uint32_t	flags,
		size_t *	size,
		void **	ptr,
		size_t *	metadata_size,
		const void **	metadata
	)

Maps an interop object into the HSA flat address space and establishes memory residency. The metadata pointer is valid during the lifetime of the map (until hsa_amd_interop_unmap_buffer is called). Multiple calls to hsa_amd_interop_map_buffer with the same interop_handle result in multiple mappings with potentially different addresses and different metadata pointers. Concurrent operations on these addresses are not coherent. Memory must be fenced to system scope to ensure consistency, between mappings and with any views of this buffer in the originating software stack.

Parameters

[in]	num_agents	Number of agents which require access to the memory
[in]	agents	List of accessing agents.
[in]	interop_handle	Handle of interop buffer (dmabuf handle in Linux)
[in]	flags	Reserved, must be 0
[out]	size	Size in bytes of the mapped object
[out]	ptr	Base address of the mapped object
[out]	metadata_size	Size of metadata in bytes, may be NULL
[out]	metadata	Pointer to metadata, may be NULL

Return values

HSA_STATUS_SUCCESS	if successfully mapped
HSA_STATUS_ERROR_NOT_INITIALIZED	if HSA is not initialized
HSA_STATUS_ERROR_OUT_OF_RESOURCES	if there is a failure in allocating necessary resources
HSA_STATUS_ERROR_INVALID_ARGUMENT	all other errors

◆ hsa_amd_interop_unmap_buffer()

hsa_status_t HSA_API hsa_amd_interop_unmap_buffer ( void * ptr )

Removes a previously mapped interop object from HSA's flat address space. Ends lifetime for the mapping's associated metadata pointer.

◆ hsa_amd_ipc_memory_attach()

hsa_status_t HSA_API hsa_amd_ipc_memory_attach	(	const hsa_amd_ipc_memory_t *	handle,
		size_t	len,
		uint32_t	num_agents,
		const hsa_agent_t *	mapping_agents,
		void **	mapped_ptr
	)

Imports shared memory into the local process and makes it accessible by the given agents. If a shared memory handle is attached multiple times in a process each attach may return a different address. Each returned address is refcounted and requires a matching number of calls to hsa_amd_ipc_memory_detach to release the shared memory mapping.

Parameters

[in]	handle	Pointer to the identifier for the shared memory.
[in]	len	Length of the shared memory to import. Reserved. Must be the full length of the shared allocation in this version.
[in]	num_agents	Count of agents in `mapping_agents`. May be zero if all agents are to be allowed access.
[in]	mapping_agents	List of agents to access the shared memory. Ignored if `num_agents` is zero.
[out]	mapped_ptr	Recieves a process local pointer to the shared memory.

Return values

HSA_STATUS_SUCCESS	if memory is successfully imported.
HSA_STATUS_ERROR_NOT_INITIALIZED	if HSA is not initialized
HSA_STATUS_ERROR_OUT_OF_RESOURCES	if there is a failure in allocating necessary resources
HSA_STATUS_ERROR_INVALID_ARGUMENT	`handle` is not valid, `len` is incorrect, `mapped_ptr` is NULL, or some agent for which access was requested can not access the shared memory.

◆ hsa_amd_ipc_memory_create()

hsa_status_t HSA_API hsa_amd_ipc_memory_create	(	void *	ptr,
		size_t	len,
		hsa_amd_ipc_memory_t *	handle
	)

Prepares an allocation for interprocess sharing and creates a handle of type hsa_amd_ipc_memory_t uniquely identifying the allocation. A handle is valid while the allocation it references remains accessible in any process. In general applications should confirm that a shared memory region has been attached (via hsa_amd_ipc_memory_attach) in the remote process prior to releasing that memory in the local process. Repeated calls for the same allocation may, but are not required to, return unique handles. The allocation needs to be on memory on an agent of type HSA_DEVICE_TYPE_GPU.

Parameters

[in]	ptr	Pointer to device memory allocated via ROCr APIs to prepare for sharing.
[in]	len	Length in bytes of the allocation to share.
[out]	handle	Process independent identifier referencing the shared allocation.

Return values

HSA_STATUS_SUCCESS	allocation is prepared for interprocess sharing.
HSA_STATUS_ERROR_NOT_INITIALIZED	if HSA is not initialized
HSA_STATUS_ERROR_OUT_OF_RESOURCES	if there is a failure in allocating necessary resources
HSA_STATUS_ERROR_INVALID_ARGUMENT	`ptr` does not point to the first byte of an allocation made through ROCr, or len is not the full length of the allocation or handle is NULL.

◆ hsa_amd_ipc_memory_detach()

hsa_status_t HSA_API hsa_amd_ipc_memory_detach ( void * mapped_ptr )

Decrements the reference count for the shared memory mapping and releases access to shared memory imported with hsa_amd_ipc_memory_attach.

Parameters

[in] mapped_ptr Pointer to the first byte of a shared allocation imported with hsa_amd_ipc_memory_attach.

Return values

HSA_STATUS_SUCCESS	if `mapped_ptr` was imported with hsa_amd_ipc_memory_attach.
HSA_STATUS_ERROR_NOT_INITIALIZED	if HSA is not initialized
HSA_STATUS_ERROR_INVALID_ARGUMENT	`mapped_ptr` was not imported with hsa_amd_ipc_memory_attach.

◆ hsa_amd_ipc_signal_attach()

hsa_status_t HSA_API hsa_amd_ipc_signal_attach	(	const hsa_amd_ipc_signal_t *	handle,
		hsa_signal_t *	signal
	)

Imports an IPC capable signal into the local process. If an IPC signal handle is attached multiple times in a process each attach may return a different signal handle. Each returned signal handle is refcounted and requires a matching number of calls to hsa_signal_destroy to release the shared signal.

Parameters

[in]	handle	Pointer to the identifier for the shared signal.
[out]	signal	Recieves a process local signal handle to the shared signal.

Return values

HSA_STATUS_SUCCESS	if the signal is successfully imported.
HSA_STATUS_ERROR_NOT_INITIALIZED	if HSA is not initialized
HSA_STATUS_ERROR_OUT_OF_RESOURCES	if there is a failure in allocating necessary resources
HSA_STATUS_ERROR_INVALID_ARGUMENT	`handle` is not valid.

◆ hsa_amd_ipc_signal_create()

hsa_status_t HSA_API hsa_amd_ipc_signal_create	(	hsa_signal_t	signal,
		hsa_amd_ipc_signal_t *	handle
	)

Obtains an interprocess sharing handle for a signal. The handle is valid while the signal it references remains valid in any process. In general applications should confirm that the signal has been attached (via hsa_amd_ipc_signal_attach) in the remote process prior to destroying that signal in the local process. Repeated calls for the same signal may, but are not required to, return unique handles.

Parameters

[in]	signal	Signal created with attribute HSA_AMD_SIGNAL_IPC.
[out]	handle	Process independent identifier referencing the shared signal.

Return values

HSA_STATUS_SUCCESS	`handle` is ready to use for interprocess sharing.
HSA_STATUS_ERROR_NOT_INITIALIZED	if HSA is not initialized
HSA_STATUS_ERROR_OUT_OF_RESOURCES	if there is a failure in allocating necessary resources
HSA_STATUS_ERROR_INVALID_ARGUMENT	`signal` is not a valid signal created with attribute HSA_AMD_SIGNAL_IPC or handle is NULL.

◆ hsa_amd_memory_async_copy()

hsa_status_t HSA_API hsa_amd_memory_async_copy	(	void *	dst,
		hsa_agent_t	dst_agent,
		const void *	src,
		hsa_agent_t	src_agent,
		size_t	size,
		uint32_t	num_dep_signals,
		const hsa_signal_t *	dep_signals,
		hsa_signal_t	completion_signal
	)

Asynchronously copy a block of memory from the location pointed to by src on the src_agent to the memory block pointed to by dst on the dst_agent. Because the DMA engines used may not be in the same coherency domain, the caller must ensure that buffers are system-level coherent. In general this requires the sending device to have released the buffer to system scope prior to executing the copy API and the receiving device must execute a system scope acquire fence prior to use of the destination buffer.

Parameters

[out]	dst	Buffer where the content is to be copied.
[in]	dst_agent	Agent associated with the `dst`. The agent must be able to directly access both the source and destination buffers in their current locations. May be zero in which case the runtime will attempt to discover the destination agent. Discovery may have variable and/or high latency.
[in]	src	A valid pointer to the source of data to be copied. The source buffer must not overlap with the destination buffer, otherwise the copy will succeed but contents of `dst` is undefined.
[in]	src_agent	Agent associated with the `src`. The agent must be able to directly access both the source and destination buffers in their current locations. May be zero in which case the runtime will attempt to discover the destination agent. Discovery may have variable and/or high latency.
[in]	size	Number of bytes to copy. If `size` is 0, no copy is performed and the function returns success. Copying a number of bytes larger than the size of the buffers pointed by `dst` or `src` results in undefined behavior.
[in]	num_dep_signals	Number of dependent signals. Can be 0.
[in]	dep_signals	List of signals that must be waited on before the copy operation starts. The copy will start after every signal has been observed with the value 0. The dependent signal should not include completion signal from hsa_amd_memory_async_copy operation to be issued in future as that can result in a deadlock. If `num_dep_signals` is 0, this argument is ignored.
[in]	completion_signal	Signal used to indicate completion of the copy operation. When the copy operation is finished, the value of the signal is decremented. The runtime indicates that an error has occurred during the copy operation by setting the value of the completion signal to a negative number. The signal handle must not be 0.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully. The application is responsible for checking for asynchronous error conditions (see the description of `completion_signal`).
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_AGENT	An agent is invalid or no discovered agent has access.
::HSA_STATUS_ERROR_INVALID_SIGNAL	`completion_signal` is invalid.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	The source or destination pointers are NULL, or the completion signal is 0.

◆ hsa_amd_memory_async_copy_on_engine()

hsa_status_t HSA_API hsa_amd_memory_async_copy_on_engine	(	void *	dst,
		hsa_agent_t	dst_agent,
		const void *	src,
		hsa_agent_t	src_agent,
		size_t	size,
		uint32_t	num_dep_signals,
		const hsa_signal_t *	dep_signals,
		hsa_signal_t	completion_signal,
		hsa_amd_sdma_engine_id_t	engine_id,
		bool	force_copy_on_sdma
	)

Asynchronously copy a block of memory from the location pointed to by src on the src_agent to the memory block pointed to by dst on the dst_agent on engine_id.

WARNING: Concurrent use of this call with hsa_amd_memory_async_copy can result in resource conflicts as HSA runtime will auto assign engines with the latter call. Approach using both calls concurrently with caution.

All param definitions are identical to hsa_amd_memory_async_copy with the exception of engine_id and force_copy_on_sdma.

Parameters

[in]	-	engine_id Target engine defined by hsa_amd_sdma_engine_id_t. Client should use hsa_amd_memory_copy_engine_status first to get the ID availability.
[in]	-	force_copy_on_sdma By default, blit kernel copies are used when dst_agent == src_agent. Setting this to true will force the copy over SDMA1.

All return definitions are identical to hsa_amd_memory_async_copy with the following ammendments:

Return values

::HSA_STATUS_ERROR_INVALID_ARGUMENT The source or destination pointers are NULL, or the completion signal is 0 or engine_id is improperly bounded.

◆ hsa_amd_memory_async_copy_rect()

hsa_status_t HSA_API hsa_amd_memory_async_copy_rect	(	const hsa_pitched_ptr_t *	dst,
		const hsa_dim3_t *	dst_offset,
		const hsa_pitched_ptr_t *	src,
		const hsa_dim3_t *	src_offset,
		const hsa_dim3_t *	range,
		hsa_agent_t	copy_agent,
		hsa_amd_copy_direction_t	dir,
		uint32_t	num_dep_signals,
		const hsa_signal_t *	dep_signals,
		hsa_signal_t	completion_signal
	)

◆ hsa_amd_memory_copy_engine_status()

hsa_status_t HSA_API hsa_amd_memory_copy_engine_status	(	hsa_agent_t	dst_agent,
		hsa_agent_t	src_agent,
		uint32_t *	engine_ids_mask
	)

Reports the availability of SDMA copy engines.

Parameters

[in]	dst_agent	Destination agent of copy status direction.
[in]	src_agent	Source agent of copy status direction.
[out]	engine_ids_mask	returns available SDMA engine IDs that can be masked with hsa_amd_sdma_engine_id_t.

Return values

::HSA_STATUS_SUCCESS	Agent has available SDMA engines.
::HSA_STATUS_ERROR_OUT_OF_RESOURCES	Agent does not have available SDMA engines.
::HSA_STATUS_ERROR_INVALID_AGENT	dst_agent and src_agent are the same as dst_agent == src_agent is generally used for shader copies.

◆ hsa_amd_memory_fill()

hsa_status_t HSA_API hsa_amd_memory_fill	(	void *	ptr,
		uint32_t	value,
		size_t	count
	)

Sets the first count of uint32_t of the block of memory pointed by ptr to the specified value.

Parameters

[in]	ptr	Pointer to the block of memory to fill.
[in]	value	Value to be set.
[in]	count	Number of uint32_t element to be set to the value.

Return values

HSA_STATUS_SUCCESS	The function has been executed successfully.
HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
HSA_STATUS_ERROR_INVALID_ARGUMENT	`ptr` is NULL or not 4 bytes aligned
HSA_STATUS_ERROR_INVALID_ALLOCATION	if the given memory region was not allocated with HSA runtime APIs.

◆ hsa_amd_memory_lock()

hsa_status_t HSA_API hsa_amd_memory_lock	(	void *	host_ptr,
		size_t	size,
		hsa_agent_t *	agents,
		int	num_agent,
		void **	agent_ptr
	)

Pin a host pointer allocated by C/C++ or OS allocator (i.e. ordinary system DRAM) and return a new pointer accessible by the agents. If the host_ptr overlaps with previously locked memory, then the overlap area is kept locked (i.e multiple mappings are permitted). In this case, the same input host_ptr may give different locked agent_ptr and when it does, they are not necessarily coherent (i.e. accessing either agent_ptr is not equivalent). Accesses to agent_ptr are coarse grained.

Parameters

[in]	host_ptr	A buffer allocated by C/C++ or OS allocator.
[in]	size	The size to be locked.
[in]	agents	Array of agent handle to gain access to the `host_ptr`. If this parameter is NULL and the `num_agent` is 0, all agents in the platform will gain access to the `host_ptr`.
[out]	agent_ptr	Pointer to the location where to store the new address.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_OUT_OF_RESOURCES	There is a failure in allocating the necessary resources.
::HSA_STATUS_ERROR_INVALID_AGENT	One or more agent in `agents` is invalid.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	`size` is 0 or `host_ptr` or `agent_ptr` is NULL or `agents` not NULL but `num_agent` is 0 or `agents` is NULL but `num_agent` is not 0.

◆ hsa_amd_memory_lock_to_pool()

hsa_status_t HSA_API hsa_amd_memory_lock_to_pool	(	void *	host_ptr,
		size_t	size,
		hsa_agent_t *	agents,
		int	num_agent,
		hsa_amd_memory_pool_t	pool,
		uint32_t	flags,
		void **	agent_ptr
	)

Pin a host pointer allocated by C/C++ or OS allocator (i.e. ordinary system DRAM) and return a new pointer accessible by the agents. If the host_ptr overlaps with previously locked memory, then the overlap area is kept locked (i.e. multiple mappings are permitted). In this case, the same input host_ptr may give different locked agent_ptr and when it does, they are not necessarily coherent (i.e. accessing either agent_ptr is not equivalent). Acesses to the memory via agent_ptr have the same access properties as memory allocated from pool as determined by hsa_amd_memory_pool_get_info and hsa_amd_agent_memory_pool_get_info (ex. coarse/fine grain, platform atomic support, link info). Physical composition and placement of the memory (ex. page size, NUMA binding) is not changed.

Parameters

[in]	host_ptr	A buffer allocated by C/C++ or OS allocator.
[in]	size	The size to be locked.
[in]	agents	Array of agent handle to gain access to the `host_ptr`. If this parameter is NULL and the `num_agent` is 0, all agents in the platform will gain access to the `host_ptr`.
[in]	pool	Global memory pool owned by a CPU agent.
[in]	flags	A bit-field that is used to specify allocation directives. Reserved parameter, must be 0.
[out]	agent_ptr	Pointer to the location where to store the new address.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_OUT_OF_RESOURCES	There is a failure in allocating the necessary resources.
::HSA_STATUS_ERROR_INVALID_AGENT	One or more agent in `agents` is invalid or can not access `pool`.
HSA_STATUS_ERROR_INVALID_MEMORY_POOL	`pool` is invalid or not owned by a CPU agent.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	`size` is 0 or `host_ptr` or `agent_ptr` is NULL or `agents` not NULL but `num_agent` is 0 or `agents` is NULL but `num_agent` is not 0 or flags is not 0.

◆ hsa_amd_memory_migrate()

hsa_status_t HSA_API hsa_amd_memory_migrate	(	const void *	ptr,
		hsa_amd_memory_pool_t	memory_pool,
		uint32_t	flags
	)

Relocate a buffer to a new memory pool.

When a buffer is migrated, its virtual address remains the same but its physical contents are moved to the indicated memory pool.

After migration, only the agent associated with the destination pool will have access.

The caller is also responsible for ensuring that the allocation in the source memory pool where the buffer is currently located can be migrated to the specified destination memory pool (using hsa_amd_memory_pool_can_migrate returns a value of true for the source and destination memory pools), otherwise behavior is undefined.

The caller must ensure that the buffer is not accessed while it is migrated.

Parameters

[in]	ptr	Buffer to be relocated. The buffer must have been released to system prior to call this API. The buffer will be released to system upon completion.
[in]	memory_pool	Memory pool where to place the buffer.
[in]	flags	A bit-field that is used to specify migration information. Must be zero.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
HSA_STATUS_ERROR_INVALID_MEMORY_POOL	The destination memory pool is invalid.
::HSA_STATUS_ERROR_OUT_OF_RESOURCES	There is a failure in allocating the necessary resources.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	`flags` is not 0.

◆ hsa_amd_memory_pool_allocate()

hsa_status_t HSA_API hsa_amd_memory_pool_allocate	(	hsa_amd_memory_pool_t	memory_pool,
		size_t	size,
		uint32_t	flags,
		void **	ptr
	)

Allocate a block of memory (or buffer) in the specified pool.

Parameters

[in]	memory_pool	Memory pool where to allocate memory from. The memory pool must have the HSA_AMD_MEMORY_POOL_INFO_RUNTIME_ALLOC_ALLOWED flag set.
[in]	size	Allocation size, in bytes. Must not be zero. This value is rounded up to the nearest multiple of HSA_AMD_MEMORY_POOL_INFO_RUNTIME_ALLOC_GRANULE in `memory_pool`.
[in]	flags	A bit-field that is used to specify allocation directives.
[out]	ptr	Pointer to the location where to store the base virtual address of the allocated block. The returned base address is aligned to the value of HSA_AMD_MEMORY_POOL_INFO_RUNTIME_ALLOC_ALIGNMENT in `memory_pool`. If the allocation fails, the returned value is undefined.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_OUT_OF_RESOURCES	No memory is available.
HSA_STATUS_ERROR_INVALID_MEMORY_POOL	The memory pool is invalid.
::HSA_STATUS_ERROR_INVALID_ALLOCATION	The host is not allowed to allocate memory in `memory_pool`, or `size` is greater than the value of HSA_AMD_MEMORY_POOL_INFO_ALLOC_MAX_SIZE in `memory_pool`.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	`ptr` is NULL, or `size` is 0, or flags is not 0.

◆ hsa_amd_memory_pool_can_migrate()

hsa_status_t HSA_API hsa_amd_memory_pool_can_migrate	(	hsa_amd_memory_pool_t	src_memory_pool,
		hsa_amd_memory_pool_t	dst_memory_pool,
		bool *	result
	)

Query if buffers currently located in some memory pool can be relocated to a destination memory pool.

If the returned value is non-zero, a migration of a buffer to dst_memory_pool using hsa_amd_memory_migrate may nevertheless fail due to resource limitations.

Parameters

[in]	src_memory_pool	Source memory pool.
[in]	dst_memory_pool	Destination memory pool.
[out]	result	Pointer to a memory location where the result of the query is stored. Must not be NULL. If buffers currently located in `src_memory_pool` can be relocated to `dst_memory_pool`, the result is true.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
HSA_STATUS_ERROR_INVALID_MEMORY_POOL	One of the memory pools is invalid.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	`result` is NULL.

◆ hsa_amd_memory_pool_free()

hsa_status_t HSA_API hsa_amd_memory_pool_free ( void * ptr )

Deallocate a block of memory previously allocated using hsa_amd_memory_pool_allocate.

Parameters

[in] ptr Pointer to a memory block. If ptr does not match a value previously returned by hsa_amd_memory_pool_allocate, the behavior is undefined.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.

◆ hsa_amd_memory_pool_get_info()

hsa_status_t HSA_API hsa_amd_memory_pool_get_info	(	hsa_amd_memory_pool_t	memory_pool,
		hsa_amd_memory_pool_info_t	attribute,
		void *	value
	)

Get the current value of an attribute of a memory pool.

Parameters

[in]	memory_pool	A valid memory pool.
[in]	attribute	Attribute to query.
[out]	value	Pointer to a application-allocated buffer where to store the value of the attribute. If the buffer passed by the application is not large enough to hold the value of `attribute`, the behavior is undefined.

Return values

::HSA_STATUS_SUCCESS The function has been executed successfully.

◆ hsa_amd_memory_unlock()

hsa_status_t HSA_API hsa_amd_memory_unlock ( void * host_ptr )

Unpin the host pointer previously pinned via hsa_amd_memory_lock or hsa_amd_memory_lock_to_pool.

The behavior is undefined if the host pointer being unpinned does not match previous pinned address or if the host pointer was already deallocated.

Parameters

[in] host_ptr A buffer allocated by C/C++ or OS allocator that was pinned previously via hsa_amd_memory_lock or hsa_amd_memory_lock_to_pool.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.

◆ hsa_amd_pointer_info()

hsa_status_t HSA_API hsa_amd_pointer_info	(	const void *	ptr,
		hsa_amd_pointer_info_t *	info,
		void ()(size_t)	alloc,
		uint32_t *	num_agents_accessible,
		hsa_agent_t **	accessible
	)

Retrieves information about the allocation referenced by the given pointer. Optionally returns the number and list of agents which can directly access the allocation. In case this virtual address is unknown, the pointer type returned will be HSA_EXT_POINTER_TYPE_UNKNOWN and the only fields that are valid after hsa_amd_pointer_info returns are size and type.

Parameters

[in]	ptr	Pointer which references the allocation to retrieve info for.
[in,out]	info	Pointer to structure to be filled with allocation info. Data member size must be set to the size of the structure prior to calling hsa_amd_pointer_info. On return size will be set to the size of the pointer info structure supported by the runtime, if smaller. Members beyond the returned value of size will not be updated by the API. Must not be NULL.
[in]	alloc	Function pointer to an allocator used to allocate the `accessible` array. If NULL `accessible` will not be returned.
[out]	num_agents_accessible	Recieves the count of agents in `accessible`. If NULL `accessible` will not be returned.
[out]	accessible	Recieves a pointer to the array, allocated by `alloc`, holding the list of agents which may directly access the allocation. May be NULL.

Return values

HSA_STATUS_SUCCESS	Info retrieved successfully
HSA_STATUS_ERROR_NOT_INITIALIZED	if HSA is not initialized
HSA_STATUS_ERROR_OUT_OF_RESOURCES	if there is a failure in allocating necessary resources
HSA_STATUS_ERROR_INVALID_ARGUMENT	NULL in `ptr` or `info`.

◆ hsa_amd_pointer_info_set_userdata()

hsa_status_t HSA_API hsa_amd_pointer_info_set_userdata	(	const void *	ptr,
		void *	userdata
	)

Associates an arbitrary pointer with an allocation known to ROCr. The pointer can be fetched by hsa_amd_pointer_info in the userData field.

Parameters

[in]	ptr	Pointer to the first byte of an allocation known to ROCr with which to associate `userdata`.
[in]	userdata	Abitrary pointer to associate with the allocation.

Return values

HSA_STATUS_SUCCESS	`userdata` successfully stored.
HSA_STATUS_ERROR_NOT_INITIALIZED	if HSA is not initialized
HSA_STATUS_ERROR_OUT_OF_RESOURCES	if there is a failure in allocating necessary resources
HSA_STATUS_ERROR_INVALID_ARGUMENT	`ptr` is not known to ROCr.

◆ hsa_amd_portable_close_dmabuf()

hsa_status_t hsa_amd_portable_close_dmabuf ( int dmabuf )

Closes an OS specific, vendor neutral, handle to a memory allocation.

Closes an OS specific handle to GPU agent memory.

Applications should close a handle after imports are complete. The handle is not required to remain open for the lifetime of imported mappings. The referenced allocation will remain valid until all handles and mappings are closed.

Parameters

[in] dmabuf Handle to be closed.

Return values

::HSA_STATUS_SUCCESS	Handle closed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_RESOURCE_FREE	A generic error was encountered when closing the handle. The handle may have been closed already or an async IO error may have occured.

◆ hsa_amd_portable_export_dmabuf()

hsa_status_t hsa_amd_portable_export_dmabuf	(	const void *	ptr,
		size_t	size,
		int *	dmabuf,
		uint64_t *	offset
	)

Obtains an OS specific, vendor neutral, handle to a memory allocation.

Obtains an OS specific handle to GPU agent memory. The memory must be part of a single allocation from an hsa_amd_memory_pool_t exposed by a GPU Agent. The handle may be used with other APIs (e.g. Vulkan) to obtain shared access to the allocation.

Shared access to the memory is not guaranteed to be fine grain coherent even if the allocation exported is from a fine grain pool. The shared memory consistency model will be no stronger than the model exported from, consult the importing API to determine the final consistency model.

The allocation's memory remains valid as long as the handle and any mapping of the handle remains valid. When the handle and all mappings are closed the backing memory will be released for reuse.

Parameters

[in]	ptr	Pointer to the allocation being exported.
[in]	size	Size in bytes to export following `ptr`. The entire range being exported must be contained within a single allocation.
[out]	dmabuf	Pointer to a dma-buf file descriptor holding a reference to the allocation. Contents will not be altered in the event of failure.
[out]	offset	Offset in bytes into the memory referenced by the dma-buf object at which `ptr` resides. Contents will not be altered in the event of failure.

Return values

::HSA_STATUS_SUCCESS	Export completed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	One or more arguments is NULL.
::HSA_STATUS_ERROR_INVALID_ALLOCATION	The address range described by `ptr` and `size` are not contained within a single allocation.
::HSA_STATUS_ERROR_INVALID_AGENT	The allocation described by `ptr` and `size` was allocated on a device which can not export memory.
::HSA_STATUS_ERROR_OUT_OF_RESOURCES	The return file descriptor, `dmabuf`, could not be created.

◆ hsa_amd_profiling_async_copy_enable()

hsa_status_t HSA_API hsa_amd_profiling_async_copy_enable ( bool enable )

Enable or disable asynchronous memory copy profiling.

The runtime will provide the copy processing start timestamp and completion timestamp of each call to hsa_amd_memory_async_copy if the async copy profiling is enabled prior to the call to hsa_amd_memory_async_copy. The completion signal object is used to hold the last async copy start and end timestamp. The client can retrieve these timestamps via call to hsa_amd_profiling_get_async_copy_time.

Parameters

[in] enable True to enable profiling. False to disable profiling.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_OUT_OF_RESOURCES	Failed on allocating resources needed to profile the asynchronous copy.

◆ hsa_amd_profiling_convert_tick_to_system_domain()

hsa_status_t HSA_API hsa_amd_profiling_convert_tick_to_system_domain	(	hsa_agent_t	agent,
		uint64_t	agent_tick,
		uint64_t *	system_tick
	)

Computes the frequency ratio and offset between the agent clock and HSA system clock and converts the agent's tick to HSA system domain tick.

Parameters

[in]	agent	The agent used to retrieve the agent_tick. It is user's responsibility to make sure the tick number is from this agent, otherwise, the behavior is undefined.
[in]	agent_tick	The tick count retrieved from the specified `agent`.
[out]	system_tick	The translated HSA system domain clock counter tick.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_AGENT	The agent is invalid.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	`system_tick` is NULL;

◆ hsa_amd_profiling_get_async_copy_time()

hsa_status_t HSA_API hsa_amd_profiling_get_async_copy_time	(	hsa_signal_t	signal,
		hsa_amd_profiling_async_copy_time_t *	time
	)

Retrieve asynchronous copy timestamps.

Async copy profiling is enabled via call to hsa_amd_profiling_async_copy_enable.

Parameters

[in]	signal	A signal used as the completion signal of the call to hsa_amd_memory_async_copy.
[out]	time	Async copy processing timestamps in the HSA system clock domain.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_SIGNAL	The signal is invalid.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	`time` is NULL.

◆ hsa_amd_profiling_get_dispatch_time()

hsa_status_t HSA_API hsa_amd_profiling_get_dispatch_time	(	hsa_agent_t	agent,
		hsa_signal_t	signal,
		hsa_amd_profiling_dispatch_time_t *	time
	)

Retrieve packet processing time stamps.

Parameters

[in]	agent	The agent with which the signal was last used. For instance, if the profiled dispatch packet is dispatched onto queue Q, which was created on agent A, then this parameter must be A.
[in]	signal	A signal used as the completion signal of the dispatch packet to retrieve time stamps from. This dispatch packet must have been issued to a queue with profiling enabled and have already completed. Also the signal must not have yet been used in any other packet following the completion of the profiled dispatch packet.
[out]	time	Packet processing timestamps in the HSA system clock domain.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_AGENT	The agent is invalid.
::HSA_STATUS_ERROR_INVALID_SIGNAL	The signal is invalid.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	`time` is NULL.

◆ hsa_amd_profiling_set_profiler_enabled()

hsa_status_t HSA_API hsa_amd_profiling_set_profiler_enabled	(	hsa_queue_t *	queue,
		int	enable
	)

Enable or disable profiling capability of a queue.

Parameters

[in]	queue	A valid queue.
[in]	enable	1 to enable profiling. 0 to disable profiling.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_QUEUE	The queue is invalid.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	`queue` is NULL.

◆ hsa_amd_queue_cu_get_mask()

hsa_status_t HSA_API hsa_amd_queue_cu_get_mask	(	const hsa_queue_t *	queue,
		uint32_t	num_cu_mask_count,
		uint32_t *	cu_mask
	)

Retrieve a queue's CU affinity mask.

Returns the first num_cu_mask_count bits of a queue's CU mask. Ensure that num_cu_mask_count is at least as large as HSA_AMD_AGENT_INFO_COMPUTE_UNIT_COUNT to retrieve the entire mask.

Parameters

[in]	queue	A pointer to HSA queue.
[in]	num_cu_mask_count	Size of CUMask bit array passed in, in bits.
[out]	cu_mask	Bit-vector representing the CU mask.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_QUEUE	`queue` is NULL or invalid.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	`num_cu_mask_count` is 0, not a multiple of 32 or `cu_mask` is NULL.

◆ hsa_amd_queue_cu_set_mask()

hsa_status_t HSA_API hsa_amd_queue_cu_set_mask	(	const hsa_queue_t *	queue,
		uint32_t	num_cu_mask_count,
		const uint32_t *	cu_mask
	)

Set a queue's CU affinity mask.

Enables the queue to run on only selected CUs. The given mask is combined by bitwise AND with any device wide mask in HSA_CU_MASK before being applied. If num_cu_mask_count is 0 then the request is interpreted as a request to enable all CUs and no cu_mask array need be given.

Parameters

[in]	queue	A pointer to HSA queue.
[in]	num_cu_mask_count	Size of CUMask bit array passed in, in bits.
[in]	cu_mask	Bit-vector representing the CU mask.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
HSA_STATUS_CU_MASK_REDUCED	The function was successfully executed but the given mask attempted to enable a CU which was disabled by HSA_CU_MASK. CUs disabled by HSA_CU_MASK remain disabled.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_QUEUE	`queue` is NULL or invalid.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	`num_cu_mask_count` is not a multiple of 32 or `num_cu_mask_count` is not 0 and cu_mask is NULL. Devices with work group processors must even-index contiguous pairwise CU enable e.g. 0x33(b'110011) is valid while 0x5(0x101) and 0x6(b'0110) are invalid.

◆ hsa_amd_queue_set_priority()

hsa_status_t HSA_API hsa_amd_queue_set_priority	(	hsa_queue_t *	queue,
		hsa_amd_queue_priority_t	priority
	)

Modifies the dispatch and wavefront scheduling prioirty for a given compute queue. The default is HSA_AMD_QUEUE_PRIORITY_NORMAL.

Parameters

[in]	queue	Compute queue to apply new priority to.
[in]	priority	Priority to associate with queue.

Return values

HSA_STATUS_SUCCESS	if priority was changed successfully.
HSA_STATUS_ERROR_INVALID_QUEUE	if queue is not a valid compute queue handle.
HSA_STATUS_ERROR_INVALID_ARGUMENT	if priority is not a valid value from hsa_amd_queue_priority_t.

◆ hsa_amd_register_deallocation_callback()

hsa_status_t HSA_API hsa_amd_register_deallocation_callback	(	void *	ptr,
		hsa_amd_deallocation_callback_t	callback,
		void *	user_data
	)

Registers a deallocation notifier monitoring for release of agent accessible address ptr. If successful, callback will be invoked when ptr is removed from accessibility from all agents.

Notification callbacks are automatically deregistered when they are invoked.

Note: The current version supports notifications of address release originating from hsa_amd_memory_pool_free. Support for other address release APIs will follow.

Parameters

[in]	ptr	Agent accessible address to monitor for deallocation. Passed to `callback`.
[in]	callback	Notifier to be invoked when `ptr` is released from agent accessibility.
[in]	user_data	User provided value passed to `callback`. May be NULL.

Return values

::HSA_STATUS_SUCCESS	The notifier registered successfully
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_ALLOCATION	`ptr` does not refer to a valid agent accessible address.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	`callback` is NULL or `ptr` is NULL.
::HSA_STATUS_ERROR_OUT_OF_RESOURCES	if there is a failure in allocating necessary resources

◆ hsa_amd_register_system_event_handler()

hsa_status_t HSA_API hsa_amd_register_system_event_handler	(	hsa_amd_system_event_callback_t	callback,
		void *	data
	)

Register AMD GPU event handler.

Parameters

[in]	callback	Callback to be invoked when an event is triggered. The HSA runtime passes two arguments to the callback: `event` is defined per event by the HSA runtime, and `data` is the user data.
[in]	data	User data that is passed to `callback`. May be NULL.

Return values

HSA_STATUS_SUCCESS	The handler has been registered successfully.
HSA_STATUS_ERROR	An event handler has already been registered.
HSA_STATUS_ERROR_INVALID_ARGUMENT	`event` is invalid.

◆ hsa_amd_signal_async_handler()

hsa_status_t HSA_API hsa_amd_signal_async_handler	(	hsa_signal_t	signal,
		hsa_signal_condition_t	cond,
		hsa_signal_value_t	value,
		hsa_amd_signal_handler	handler,
		void *	arg
	)

Register asynchronous signal handler function.

Allows registering a callback function and user provided value with a signal and wait condition. The callback will be invoked if the associated signal and wait condition are satisfied. Callbacks will be invoked serially but in an arbitrary order so callbacks should be independent of each other. After being invoked a callback may continue to wait for its associated signal and condition and, possibly, be invoked again. Or the callback may stop waiting. If the callback returns true then it will continue waiting and may be called again. If false then the callback will not wait again and will not be called again for the associated signal and condition. It is possible to register the same callback multiple times with the same or different signals and/or conditions. Each registration of the callback will be treated entirely independently.

Parameters

[in]	signal	hsa signal to be asynchronously monitored
[in]	cond	condition value to monitor for
[in]	value	signal value used in condition expression
[in]	handler	asynchronous signal handler invoked when signal's condition is met
[in]	arg	user provided value which is provided to handler when handler is invoked

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_SIGNAL	signal is not a valid hsa_signal_t
::HSA_STATUS_ERROR_INVALID_ARGUMENT	handler is invalid (NULL)
::HSA_STATUS_ERROR_OUT_OF_RESOURCES	The HSA runtime is out of resources or blocking signals are not supported by the HSA driver component.

◆ hsa_amd_signal_create()

hsa_status_t HSA_API hsa_amd_signal_create	(	hsa_signal_value_t	initial_value,
		uint32_t	num_consumers,
		const hsa_agent_t *	consumers,
		uint64_t	attributes,
		hsa_signal_t *	signal
	)

Create a signal with specific attributes.

Parameters

[in]	initial_value	Initial value of the signal.
[in]	num_consumers	Size of `consumers`. A value of 0 indicates that any agent might wait on the signal.
[in]	consumers	List of agents that might consume (wait on) the signal. If `num_consumers` is 0, this argument is ignored; otherwise, the HSA runtime might use the list to optimize the handling of the signal object. If an agent not listed in `consumers` waits on the returned signal, the behavior is undefined. The memory associated with `consumers` can be reused or freed after the function returns.
[in]	attributes	Requested signal attributes. Multiple signal attributes may be requested by combining them with bitwise OR. Requesting no attributes (`attributes` == 0) results in the same signal as would have been obtained via hsa_signal_create.
[out]	signal	Pointer to a memory location where the HSA runtime will store the newly created signal handle. Must not be NULL.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_OUT_OF_RESOURCES	The HSA runtime failed to allocate the required resources.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	`signal` is NULL, `num_consumers` is greater than 0 but `consumers` is NULL, or `consumers` contains duplicates.

◆ hsa_amd_signal_value_pointer()

hsa_status_t hsa_amd_signal_value_pointer	(	hsa_signal_t	signal,
		volatile hsa_signal_value_t **	value_ptr
	)

Returns a pointer to the value of a signal.

Use of this API does not modify the lifetime of ::signal and any hsa_signal_value_t retrieved by this API has lifetime equal to that of ::signal.

This API is intended for partial interoperability with non-HSA compatible devices and should not be used where HSA interfaces are available.

Use of the signal value must comply with use restritions of ::signal. Use may result in data races if the operations performed are not platform atomic. Use with HSA_AMD_SIGNAL_AMD_GPU_ONLY or HSA_AMD_SIGNAL_IPC attributed signals is required.

Parameters

[in]	Signal	handle to extract the signal value pointer from.
[out]	Location	where the extracted signal value pointer will be placed.

Return values

::HSA_STATUS_SUCCESS	The function has been executed successfully.
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_SIGNAL	signal is not a valid hsa_signal_t
::HSA_STATUS_ERROR_INVALID_ARGUMENT	value_ptr is NULL.

◆ hsa_amd_signal_wait_any()

uint32_t HSA_API hsa_amd_signal_wait_any	(	uint32_t	signal_count,
		hsa_signal_t *	signals,
		hsa_signal_condition_t *	conds,
		hsa_signal_value_t *	values,
		uint64_t	timeout_hint,
		hsa_wait_state_t	wait_hint,
		hsa_signal_value_t *	satisfying_value
	)

Wait for any signal-condition pair to be satisfied.

Allows waiting for any of several signal and conditions pairs to be satisfied. The function returns the index into the list of signals of the first satisfying signal-condition pair. The value of the satisfying signal's value is returned in satisfying_value unless satisfying_value is NULL. This function provides only relaxed memory semantics.

◆ hsa_amd_spm_acquire()

hsa_status_t hsa_amd_spm_acquire ( hsa_agent_t preferred_agent )

Acquire Stream Performance Monitor on an agent.

Acquire exclusive use of SPM on preferred_agent. See hsa_amd_spm_set_dest_buffer to provide a destination buffer to KFD to start recording and retrieve this data.

Parameters

[in] preferred_agent Agent on which to acquire SPM

◆ hsa_amd_spm_release()

hsa_status_t hsa_amd_spm_release ( hsa_agent_t preferred_agent )

Release Stream Performance Monitor on an agent.

Release exclusive use of SPM on preferred_agent. This will stop KFD writing SPM data. If a destination buffer is set, then data in the destination buffer is available to user when this function returns.

Parameters

[in] preferred_agent Agent on which to release SPM

◆ hsa_amd_spm_set_dest_buffer()

hsa_status_t hsa_amd_spm_set_dest_buffer	(	hsa_agent_t	preferred_agent,
		size_t	size_in_bytes,
		uint32_t *	timeout,
		uint32_t *	size_copied,
		void *	dest,
		bool *	is_data_loss
	)

Set up the current destination user mode buffer for stream performance counter data. KFD will start writing SPM data into the destination buffer. KFD will continue to copy data into the current destination buffer until any of the following functions are called.

hsa_amd_spm_release
hsa_amd_spm_set_dest_buffer with dest set to NULL
hsa_amd_spm_set_dest_buffer with dest set to a new buffer

if timeout is non-0, the call will wait for up to timeout ms for the previous buffer to be filled. If previous buffer to be filled before timeout, the timeout will be updated value with the time remaining. If the timeout is exceeded, the function copies any partial data available into the previous user buffer and returns success. User should not access destination data while KFD is copying data. If the previous destination buffer was full, then is_data_loss flag is set. dest is CPU accessible memory. It could be malloc'ed memory or host allocated memory

Parameters

[in]	preferred_agent	Agent on which to set the dest buffer
[in]	size_in_bytes	size of the buffer
	[in/out]	timeout timeout in milliseconds
[out]	size_copied	number of bytes copied
[in]	dest	destination address. Set to NULL to stop copy on previous buffer
[out]	is_data_loss	true is data was lost

◆ hsa_amd_svm_attributes_get()

hsa_status_t hsa_amd_svm_attributes_get	(	void *	ptr,
		size_t	size,
		hsa_amd_svm_attribute_pair_t *	attribute_list,
		size_t	attribute_count
	)

Gets SVM memory attributes.

Attributes HSA_AMD_SVM_ATTRIB_AGENT_ACCESSIBLE, HSA_AMD_SVM_ATTRIB_AGENT_ACCESSIBLE_IN_PLACE and HSA_AMD_SVM_ATTRIB_PREFETCH_LOCATION may not be used with this API.

Note that attribute HSA_AMD_SVM_ATTRIB_ACCESS_QUERY takes as input an hsa_agent_t and returns the current access type through its attribute field.

Parameters

[in]	ptr	Will be aligned down to nearest page boundary.
[in]	size	Will be aligned up to nearest page boundary.
[in]	attribute_list	List of attributes to set for the address range.
[in]	attribute_count	Length of `attribute_list`.

◆ hsa_amd_svm_attributes_set()

hsa_status_t hsa_amd_svm_attributes_set	(	void *	ptr,
		size_t	size,
		hsa_amd_svm_attribute_pair_t *	attribute_list,
		size_t	attribute_count
	)

Sets SVM memory attributes.

If HSA_AMD_SYSTEM_INFO_SVM_ACCESSIBLE_BY_DEFAULT returns false then enabling access to an Agent via this API (setting HSA_AMD_SVM_ATTRIB_AGENT_ACCESSIBLE or HSA_AMD_SVM_ATTRIB_AGENT_ACCESSIBLE_IN_PLACE) is required prior to SVM memory access by that Agent.

Attributes HSA_AMD_SVM_ATTRIB_ACCESS_QUERY and HSA_AMD_SVM_ATTRIB_PREFETCH_LOCATION may not be used with this API.

Parameters

[in]	ptr	Will be aligned down to nearest page boundary.
[in]	size	Will be aligned up to nearest page boundary.
[in]	attribute_list	List of attributes to set for the address range.
[in]	attribute_count	Length of `attribute_list`.

◆ hsa_amd_svm_prefetch_async()

hsa_status_t hsa_amd_svm_prefetch_async	(	void *	ptr,
		size_t	size,
		hsa_agent_t	agent,
		uint32_t	num_dep_signals,
		const hsa_signal_t *	dep_signals,
		hsa_signal_t	completion_signal
	)

Asynchronously migrates memory to an agent.

Schedules memory migration to agent when dep_signals have been observed equal to zero. completion_signal will decrement when the migration is complete.

Parameters

[in]	ptr	Will be aligned down to nearest page boundary.
[in]	size	Will be aligned up to nearest page boundary.
[in]	agent	Agent to migrate to.
[in]	num_dep_signals	Number of dependent signals. Can be 0.
[in]	dep_signals	List of signals that must be waited on before the migration operation starts. The migration will start after every signal has been observed with the value 0. If `num_dep_signals` is 0, this argument is ignored.
[in]	completion_signal	Signal used to indicate completion of the migration operation. When the migration operation is finished, the value of the signal is decremented. The runtime indicates that an error has occurred during the copy operation by setting the value of the completion signal to a negative number. If no completion signal is required this handle may be null.

◆ hsa_amd_vmem_address_free()

hsa_status_t hsa_amd_vmem_address_free	(	void *	va,
		size_t	size
	)

Free a reserved address range.

Free a previously allocated address range. The size must match the size of a previously allocated address range.

Parameters

[out]	va	virtual address to be freed
[in]	size	of address range

Return values

::HSA_STATUS_SUCCESS	Address range released successfully
::HSA_STATUS_ERROR_INVALID_ALLOCATION	Invalid va specified
::HSA_STATUS_ERROR_INVALID_ARGUMENT	Invalid size specified
::HSA_STATUS_ERROR_RESOURCE_FREE	Address range is still in use
::HSA_STATUS_ERROR	Internal unexpected error

◆ hsa_amd_vmem_address_reserve()

hsa_status_t hsa_amd_vmem_address_reserve	(	void **	va,
		size_t	size,
		uint64_t	address,
		uint64_t	flags
	)

Allocate a reserved address range.

Reserve a virtual address range. The size must be a multiple of the system page size. If it is not possible to allocate the address specified by address, then va will be a different address range. Address range should be released by calling hsa_amd_vmem_address_free.

Parameters

[out]	va	virtual address allocated
[in]	size	of address range requested
[in]	address	requested
[in]	flags	currently unsupported

Return values

::HSA_STATUS_SUCCESS	Address range allocated successfully
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_OUT_OF_RESOURCES	Insufficient resources to allocate an address range of this size.

◆ hsa_amd_vmem_export_shareable_handle()

hsa_status_t hsa_amd_vmem_export_shareable_handle	(	int *	dmabuf_fd,
		hsa_amd_vmem_alloc_handle_t	handle,
		uint64_t	flags
	)

Get an exportable shareable handle.

Get an exportable shareable handle for a memory_handle. This shareabl handle can then be used to re-create a virtual memory handle using hsa_amd_vmem_import_shareable_handle. The shareable handle can be transferred using mechanisms that support posix file descriptors Once all shareable handles are closed, the memory_handle is released.

Parameters

[out]	dmabuf_fd	shareable handle
[in]	handle	previously allocated virtual memory handle
[in]	flags	Currently unsupported

Return values

::HSA_STATUS_SUCCESS
::HSA_STATUS_ERROR_INVALID_ALLOCATION	Invalid memory handle
::HSA_STATUS_ERROR_OUT_OF_RESOURCES	Out of resources
::HSA_STATUS_ERROR	Unexpected internal error

◆ hsa_amd_vmem_get_access()

hsa_status_t hsa_amd_vmem_get_access	(	void *	va,
		hsa_access_permission_t *	perms,
		hsa_agent_t	agent_handle
	)

Get current access permissions for memory mapping.

Get access permissions for memory mapping for specific agent.

Parameters

[in]	va	previously mapped virtual address
[in]	perms	current permissions
[in]	agent_handle	agent

Return values

::HSA_STATUS_SUCCESS
::HSA_STATUS_ERROR_INVALID_AGENT	Invalid agent
::HSA_STATUS_ERROR_INVALID_ALLOCATION	va is not mapped or permissions never set for this agent
::HSA_STATUS_ERROR	Unexpected internal error

◆ hsa_amd_vmem_get_alloc_properties_from_handle()

hsa_status_t hsa_amd_vmem_get_alloc_properties_from_handle	(	hsa_amd_vmem_alloc_handle_t	memory_handle,
		hsa_amd_memory_pool_t *	pool,
		hsa_amd_memory_type_t *	type
	)

◆ hsa_amd_vmem_handle_create()

hsa_status_t hsa_amd_vmem_handle_create	(	hsa_amd_memory_pool_t	pool,
		size_t	size,
		hsa_amd_memory_type_t	type,
		uint64_t	flags,
		hsa_amd_vmem_alloc_handle_t *	memory_handle
	)

Create a virtual memory handle.

Create a virtual memory handle within this pool size must be a aligned to allocation granule size for this memory pool, see HSA_AMD_MEMORY_POOL_INFO_RUNTIME_ALLOC_GRANULE To minimize internal memory fragmentation, align the size to the recommended allocation granule size, see HSA_AMD_MEMORY_POOL_INFO_RUNTIME_ALLOC_REC_GRANULE

Parameters

[in]	pool	memory to use
[in]	size	of the memory allocation
[in]	type	of memory
[in]	flags	- currently unsupported
[out]	memory_handle	- handle for the allocation

Return values

::HSA_STATUS_SUCCESS	memory allocated successfully
::HSA_STATUS_ERROR_NOT_INITIALIZED	The HSA runtime has not been initialized.
::HSA_STATUS_ERROR_INVALID_ARGUMENT	Invalid arguments
::HSA_STATUS_ERROR_INVALID_ALLOCATION	This memory pool does not support allocations
::HSA_STATUS_ERROR_OUT_OF_RESOURCES	Insufficient resources to allocate this memory

◆ hsa_amd_vmem_handle_release()

hsa_status_t hsa_amd_vmem_handle_release ( hsa_amd_vmem_alloc_handle_t memory_handle )

Release a virtual memory handle.

Parameters

[in] memory handle that was previously allocated

Return values

::HSA_STATUS_SUCCESS	Address range allocated successfully
::HSA_STATUS_ERROR_INVALID_ALLOCATION	Invalid memory handle

◆ hsa_amd_vmem_import_shareable_handle()

hsa_status_t hsa_amd_vmem_import_shareable_handle	(	int	dmabuf_fd,
		hsa_amd_vmem_alloc_handle_t *	handle
	)

Import a shareable handle.

Import a shareable handle for a memory handle. Importing a shareable handle that has been closed and released results in undefined behavior.

Parameters

[in]	dmabuf_fd	shareable handle exported with hsa_amd_vmem_export_shareable_handle
[out]	handle	virtual memory handle

Return values

::HSA_STATUS_SUCCESS
::HSA_STATUS_ERROR_INVALID_ALLOCATION	Invalid memory handle
::HSA_STATUS_ERROR_OUT_OF_RESOURCES	Out of resources
::HSA_STATUS_ERROR	Unexpected internal error

◆ hsa_amd_vmem_map()

hsa_status_t hsa_amd_vmem_map	(	void *	va,
		size_t	size,
		size_t	in_offset,
		hsa_amd_vmem_alloc_handle_t	memory_handle,
		uint64_t	flags
	)

Map a virtual memory handle.

Map a virtual memory handle to a reserved address range. The virtual address requested must be within a previously reserved address range. va and (va + size) must be must be within (va + size) of the previous allocated address range. size must be equal to size of the memory_handle hsa_amd_vmem_set_access needs to be called to make the memory accessible to specific agents

Parameters

[in]	va	virtual address range where memory will be mapped
[in]	size	of memory mapping
[in]	in_offset	offset into memory. Currently unsupported
[in]	memory_handle	virtual memory handle to be mapped
[in]	flags.	Currently unsupported

Return values

::HSA_STATUS_SUCCESS	Memory mapped successfully
::HSA_STATUS_ERROR_INVALID_ARGUMENT	va, size or memory_handle are invalid
::HSA_STATUS_ERROR_OUT_OF_RESOURCES	Insufficient resources
::HSA_STATUS_ERROR	Unexpected internal error

◆ hsa_amd_vmem_retain_alloc_handle()

hsa_status_t hsa_amd_vmem_retain_alloc_handle	(	hsa_amd_vmem_alloc_handle_t *	memory_handle,
		void *	addr
	)

Returns memory handle for mapped memory.

Return a memory handle for previously mapped memory. The handle will be the same value of handle used to map the memory. The returned handle must be released with corresponding number of calls to hsa_amd_vmem_handle_release.

Parameters

[out]	memory_handle	memory handle for this mapped address
[in]	mapped	address

Return values

::HSA_STATUS_SUCCESS
::HSA_STATUS_ERROR_INVALID_ALLOCATION	Invalid address

◆ hsa_amd_vmem_set_access()

hsa_status_t hsa_amd_vmem_set_access	(	void *	va,
		size_t	size,
		const hsa_amd_memory_access_desc_t *	desc,
		size_t	desc_cnt
	)

Make a memory mapping accessible.

Make previously mapped virtual address accessible to specific agents. size must be equal to size of previously mapped virtual memory handle. Calling hsa_amd_vmem_set_access multiple times on the same va will overwrite previous permissions for all agents

Parameters

[in]	va	previously mapped virtual address
[in]	size	of memory mapping
[in]	desc	list of access permissions for each agent
[in]	desc_cnt	number of elements in desc

Return values

::HSA_STATUS_SUCCESS
::HSA_STATUS_ERROR_INVALID_ARGUMENT	va, size or memory_handle are invalid
::HSA_STATUS_ERROR_INVALID_ALLOCATION	memory_handle is invalid
::HSA_STATUS_ERROR_OUT_OF_RESOURCES	Insufficient resources
::HSA_STATUS_ERROR_INVALID_AGENT	Invalid agent in desc
::HSA_STATUS_ERROR	Unexpected internal error

◆ hsa_amd_vmem_unmap()

hsa_status_t hsa_amd_vmem_unmap	(	void *	va,
		size_t	size
	)

Unmap a virtual memory handle.

Unmap previously mapped virtual address range

Parameters

[in]	va	virtual address range where memory will be mapped
[in]	size	of memory mapping

Return values

::HSA_STATUS_SUCCESS	Memory backing unmapped successfully
::HSA_STATUS_ERROR_INVALID_ALLOCATION	memory_handle is invalid
::HSA_STATUS_ERROR_INVALID_ARGUMENT	size is invalid
::HSA_STATUS_ERROR	Unexpected internal error

/home/docs/checkouts/readthedocs.org/user_builds/advanced-micro-devices-hip/checkouts/ROCR-Runtime/src/inc/hsa_ext_amd.h File Reference

/home/docs/checkouts/readthedocs.org/user_builds/advanced-micro-devices-hip/checkouts/ROCR-Runtime/src/inc/hsa_ext_amd.h File Reference#

Data Structures

Macros

Typedefs

Enumerations

Functions

Variables

Macro Definition Documentation

◆ HSA_AMD_INTERFACE_VERSION_MAJOR

◆ HSA_AMD_INTERFACE_VERSION_MINOR

Typedef Documentation

◆ hsa_amd_deallocation_callback_t

◆ hsa_amd_ipc_signal_t

◆ hsa_amd_signal_handler

◆ hsa_amd_system_event_callback_t

Enumeration Type Documentation

◆ anonymous enum

◆ hsa_amd_agent_info_t

◆ hsa_amd_agent_memory_pool_info_t

◆ hsa_amd_agent_memory_properties_t

◆ hsa_amd_coherency_type_t

◆ hsa_amd_copy_direction_t

◆ hsa_amd_event_type_t

◆ hsa_amd_hw_exception_reset_cause_t

◆ hsa_amd_hw_exception_reset_type_t

◆ hsa_amd_iommu_version_t

◆ hsa_amd_link_info_type_t

◆ hsa_amd_memory_fault_reason_t

◆ hsa_amd_memory_pool_access_t

◆ hsa_amd_memory_pool_flag_t

◆ hsa_amd_memory_pool_global_flag_t

◆ hsa_amd_memory_pool_info_t

◆ hsa_amd_memory_pool_location_t

◆ hsa_amd_memory_type_t

◆ hsa_amd_pointer_type_t

◆ hsa_amd_queue_priority_t

◆ hsa_amd_region_info_t

◆ hsa_amd_sdma_engine_id_t

◆ hsa_amd_segment_t

◆ hsa_amd_signal_attribute_t

◆ hsa_amd_svm_attribute_t

◆ hsa_amd_svm_model_t

Function Documentation

◆ hsa_amd_agent_iterate_memory_pools()

◆ hsa_amd_agent_memory_pool_get_info()

◆ hsa_amd_agent_set_async_scratch_limit()

◆ hsa_amd_agents_allow_access()

◆ hsa_amd_async_function()

◆ hsa_amd_coherency_get_type()

◆ hsa_amd_coherency_set_type()

◆ hsa_amd_deregister_deallocation_callback()

◆ hsa_amd_image_create()

◆ hsa_amd_image_get_info_max_dim()

◆ hsa_amd_interop_map_buffer()

◆ hsa_amd_interop_unmap_buffer()

◆ hsa_amd_ipc_memory_attach()

◆ hsa_amd_ipc_memory_create()

◆ hsa_amd_ipc_memory_detach()

◆ hsa_amd_ipc_signal_attach()

◆ hsa_amd_ipc_signal_create()

◆ hsa_amd_memory_async_copy()

◆ hsa_amd_memory_async_copy_on_engine()

◆ hsa_amd_memory_async_copy_rect()

◆ hsa_amd_memory_copy_engine_status()

◆ hsa_amd_memory_fill()

◆ hsa_amd_memory_lock()

◆ hsa_amd_memory_lock_to_pool()

◆ hsa_amd_memory_migrate()

◆ hsa_amd_memory_pool_allocate()

◆ hsa_amd_memory_pool_can_migrate()

◆ hsa_amd_memory_pool_free()

◆ hsa_amd_memory_pool_get_info()

◆ hsa_amd_memory_unlock()

◆ hsa_amd_pointer_info()

◆ hsa_amd_pointer_info_set_userdata()

◆ hsa_amd_portable_close_dmabuf()

◆ hsa_amd_portable_export_dmabuf()

◆ hsa_amd_profiling_async_copy_enable()

◆ hsa_amd_profiling_convert_tick_to_system_domain()